Metallic cylinders are widely used in various fields of industrial production, and the automatic detection of surface microcracks is of great significance to the subsequent grinding process. In this paper, laser-excited surface acoustic waves (SAW) are used to detect surface microcracks. Due to the dispersion of SAWs on the cylinder surface, the SAWs exhibit different polarities at different positions. In order to improve the consistency of signals and the accuracy of the modeling, the angle at which the polarity is completely reversed is selected as the detection point. A laser ultrasonic automatic detection system is established to obtain signals, and the B-scan image is drawn to determine the location of the microcrack. By comparing the time–frequency diagrams of the reflected SAWs and transmitted SAWs, the transmitted wave is chosen to establish the microcrack depth prediction model. In addition, according to the trajectory of the grinding wheel, a prediction model based on the absolute depth of the microcracks is established, and the influence of the orientation of the microcracks on the signal energy is considered. The method proposed in this paper can provide a reference for the rapid grinding of microcracks on the surface of metallic cylinders; it has the characteristics of visualization and high efficiency, and overcomes the shortcomings of the currently used eddy current testing that provides information on the depth of microcracks with difficulty.
Cylindrical components are parts with curved surfaces, and their high-precision defect testing is of great significance to industrial production. This paper proposes a noncontact internal defect imaging method for cylindrical components, and an automatic photoacoustic testing platform is built. A synthetic aperture focusing technology in the polar coordinate system based on laser ultrasonic (LU-pSAFT) is established, and the relationship between the imaging quality and position of discrete points is analyzed. In order to verify the validity of this method, small holes of Φ0.5 mm in the aluminum alloy rod are tested. During the imaging process, since a variety of waveforms can be excited by the pulsed laser synchronously, the masked longitudinal waves reflected by small holes need to be filtered and windowed to achieve high-quality imaging. In addition, the influence of ultrasonic beam angle and signal array spacing on imaging quality is analyzed. The results show that the method can accurately present the outline of the small hole, the circumferential resolution of the small hole is less than 1° and the dimensional accuracy and position error are less than 0.1 mm.
1 April 2024 in Russian Journal of Nondestructive Testing
An improved frequency-domain synthetic aperture focusing technique (F-SAFT) for laser ultrasonic testing (LUT) is proposed for internal defect detection of small-diameter cylindrical components. Firstly, a LUT automated detection platform is built, a pulsed laser is used to excite ultrasonic waves and a two-wave mixing (TWM) interferometer is used to detect ultrasonic waves. Since ultrasonic signals are affected by the thermal expansion of the pulsed laser, time-frequency analysis is used to obtain the frequency range for imaging longitudinal waves, and the influence of low-frequency clutter is eliminated through multiple filtering. Secondly, in order to balance signal acquisition efficiency and imaging quality, the peak signal-to-noise ratio (PSNR) is used to determine the optimal angular step size. Finally, the equivalent velocity of the longitudinal wave is corrected to compensate for the imaging position error caused by the separation of the ultrasonic excitation point and the detection point. The results show that the method proposed in this paper has high imaging accuracy, which could provide a new approach for in-service non-destructive testing of small-diameter cylindrical components.
In this study, to investigate the problem of contact fatigue and the damage mechanism of an AD180 high-carbon semi-steel roll, rolling contact fatigue tests were conducted using specimens cut from the periphery of a roll ring. These specimens were characterized under different contact stresses using SEM, a profile system, an optical microscope, and a Vickers hardness tester. The results indicates that the main forms of fatigue damage of an AD180 high-carbon semi-steel roll are peeling, pitting corrosion, and plowing. Moreover, the surface of the roll exhibits delamination and plastic deformation characteristics under high contact stress. Meanwhile, the size and depth of peeling, as well as the amount of pitting corrosion, increase with the contact stress. Peeling is mainly caused by a crack that originates at the edge of the specimen surface and propagates along the pearlite structure and the interface between pearlite and cementite. High contact stress can lead to an increase in the crack propagation depth and angle, resulting in the formation of larger peeling. Under cyclic loading, the near-surface microstructure of the specimen hardens due to grain refinement and dislocation strengthening, and the depth of the hardened layer increases with the increase in contact stress. When the contact stress reaches 1400 MPa, the near surface structure of the specimen changes from pearlite to troostite.
9 September 2025 in Journal of Iron and Steel Research International