The service life of an artificial hip joint is limited to 10–15 years, which is not ideal for young patients. To extend the lifespan of these prostheses, the coefficient of friction and wear resistance of metallic femoral heads must be improved. In this study, a Cu‐doped titanium nitride (TiNX–Cu) film with “autoantifriction” properties is deposited on a CoCrMo alloy via magnetron sputtering. When delivered in a protein‐containing lubricating medium, the Cu in TiNX–Cu quickly and consistently binds to the protein molecules in the microenvironment, resulting in the formation of a stable protein layer. The proteins adsorbed on the TiNX–Cu surface decompose into hydrocarbon fragments owing to the shear stress between the Al2O3/TiNX–Cu tribopair. The synergistic effect of the catalysis of Cu and shear stress between the Al2O3/TiNX–Cu tribopair transforms these fragments into graphite‐like carbon tribofilms with an antifriction property. These tribofilms can simultaneously reduce the friction coefficient of the Al2O3/TiNX–Cu tribopair and enhance the wear resistance of the TiNX–Cu film. Based on these findings, it is believed that the autoantifriction film can drive the generation of antifriction tribofilms for lubricating and increasing the wear resistance of prosthetic devices, thereby prolonging their lifespan.
Classically activated M1 macrophages and alternatively activated M2 macrophages play key roles in regulating immune responses. M1 macrophages initiate angiogenesis in the early stages of wound healing or after implantation. However, their prolonged activation can lead to chronic inflammation. We speculated that biomedical implants with specific properties can induce a shift from M1 to M2 macrophages at a specific time point to promote tissue repair and wound healing. To investigate this possibility, drug-loaded double-layer sol–gel coatings were fabricated on TiO 2 nanotubes (TNTs), which were used to modulate the switch from the M1 to the M2 phenotype by controlled release of interleukin (IL)-4. The lower sol–gel layer with IL-4 consisted of a carboxymethyl chitosan (CMCS) hydrogel, 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide, and N-hydroxysuccinimide as a crosslinker (IL4/TNT). The upper layer fabricated on the IL4/TNT sample was another type of CMCS hydrogel that used genipin (GP) as a crosslinker (GP/IL4/TNT). We found that IL-4 was released from GP/IL4/TNTs in a controlled manner, with the greatest release occurring after 72 h. GP/IL4/TNT stimulated the polarization of macrophages from the M1 to M2 phenotype after the macrophage polarization from the M0 to M1 phenotype. This provides a template for the fabrication of biomaterials that can direct macrophage polarization and stimulate tissue regeneration following the initial inflammatory response to implants.
In this work, a multifunctional ratiometric fluorescence (FL) nanohybrid (CSCDs@DC) was synthesized from chitosan based carbon dots (CSCDs) and dansyl chloride (DC) at room temperature. The CSCDs@DC revealed strong FL intensity, great stability and excellent anti-photobleaching properties. Herein, CSCDs@DC was responsive to pH value in the range of 1.5–4.0 and exhibited color-switchable FL properties between acidic and alkaline environments. In addition, CSCDs@DC showed good selectivity and sensitivity towards Fe3+ ions. A good linear relationship for the Fe3+ ion detection was obtained in the range from 0 μM to 100 μM, with a detection limit of 1.23 μM. What's more, CSCDs@DC can be used as a fluorescent ink. It expressed superior optical properties after 3 months of storage or continuous exposure to UV light for 24 h. This study suggested that CSCDs@DC had potential in the detection of pH and metal ions, as well as showing promising application in the anti-counterfeiting field.
We extracted magnesium-rich calcium phosphate bioceramics from tilapia bone using a gradient thermal treatment approach and investigated their chemical and physicochemical properties. X-ray diffraction showed that tilapia fish bone-derived hydroxyapatite (FHA) was generated through the first stage of thermal processing at 600–800 °C. Using FHA as a precursor, fish bone biphasic calcium phosphate (FBCP) was produced after the second stage of thermal processing at 900–1200 °C. The beta-tricalcium phosphate content in the FBCP increased with an increasing calcination temperature. The fact that the lattice spacing of the FHA and FBCP was smaller than that of commercial hydroxyapatite (CHA) suggests that Mg-substituted calcium phosphate was produced via the gradient thermal treatment. Both the FHA and FBCP contained considerable quantities of magnesium, with the FHA having a higher concentration. In addition, the FHA and FBCP, particularly the FBCP, degraded faster than the CHA. After one day of degradation, both the FHA and FBCP released Mg2+, with cumulative amounts of 4.38 mg/L and 0.58 mg/L, respectively. Furthermore, the FHA and FBCP demonstrated superior bone-like apatite formation; they are non-toxic and exhibit better osteoconductive activity than the CHA. In light of our findings, bioceramics originating from tilapia bone appear to be promising in biomedical applications such as fabricating tissue engineering scaffolds.
Management of antibiotic-resistant bacteria-induced skin infections for rapid healing remains a critical clinical challenge. Photothermal therapy, which uses mediated hyperthermia to combat such problems, has recently been recognised as a promising approach to take. In this study, bacterial cellulose-based photothermal membranes were designed and developed to combat bacterial infections and promote rapid wound healing. Polydopamine was incorporated into gold nanoparticles to produce superior dual-photothermal behaviour. The in vitro antibacterial efficacy of the prepared composite membranes against S. aureus, E. coli and methicillin-resistant Staphylococcus aureus (MRSA) could reach 99% under near-infrared (NIR) irradiation. In addition, the synthesised nanocomposite exhibited good biocompatibility in vitro as demonstrated by a cell survival ratio of >85%. The effectiveness of the composite membranes on wound healing was further investigated in a murine model of MRSA-infected wounds, focusing on the effect of photothermal temperature. According to the detailed therapeutic mechanism study undertaken, the composite membranes cause bacterial killing initially and promote the transition from the inflammatory phase to proliferation by suppressing pro-inflammatory cytokine production, promoting collagen deposition, and stimulating angiogenesis. Considering their remarkable effectiveness and facile fabrication process, it is expected that these novel materials could serve as competitive multifunctional dressings in the management of infectious wounds and accelerate the regeneration of damaged tissues related to abnormal immune responses.