In recent years, software defined radio and digital signal processing have been widely used in communication and radar. As a result, the hardware and RF front-end for radar and wireless communication tends to be similar. Thus, using the same RF and hardware platform for joint radar-communication becomes viable. Joint radar-communication would bring more efficient plan and usage for the radio spectral resource. Furthermore, it could enable new applications that require information exchange and precise localization at the same time. In this paper, cyclic prefixed single carrier (CP-SC) and its variations are chosen as the waveforms for joint radar-communication. CP-SC waveform and its variations are popular in wireless communication and have been chosen by a few standards like IEEE 802.11ad and LTE-advanced. Efficient algorithms are proposed to use such waveforms for range and speed detection/estimation of targets. The proposed algorithms are derived from the maximum likelihood (ML) principle and have low computational complexity. Simulations show that the estimation performance of the proposed method is almost the same as that of ML and is much better than that of the channel estimation based method.
16 February 2022 in IEEE Transactions on Vehicular Technology
In this article, we study the radar angular resolution, the capability of distinguishing multiple targets in different directions of arrivals (DoA). We present a deep learning-based super resolution DoA estimator for multiple input multiple output (MIMO) radar with single snapshot data. The estimator consists of a deep learning DoA classifier (DLDC) in the central bearing angle zone, which can simultaneously detect up to 11 targets in $[ { - 2^\circ,\ 2^\circ } ]$ with 32 virtual antenna elements, and a spatial filtering pre-rotator (SFPR) that makes the DLDC supporting any bearing angle location in a wider radar field of view (FoV). We present the DLDC-SFPR structure and provide detailed parameter setting. In the performance evaluation, the resolution of proposed method is first compared with the theoretical angular resolution limit (ARL). It is shown that the proposed estimator reaches the Chernoff ARL. The probability of resolution (PoR) is then investigated and compared with typical and state-of-the-art DoA estimators in various conditions. The numerical results show that the DLDC-SFPR achieves 0.4 ° resolution with 90% PoR to distinguish 2 targets at signal to noise ratio (SNR) of 7 dB if the targets are on-gird. In the case of any-angle, the same resolution and probability are achieved at SNR = 12 dB. The proposed method is robust to multi-target concurrent cases, and outperforms the existing reported approaches. Two procedures, uniform scanning and progressive scanning, are proposed for wider FoV applications.
24 May 2024 in IEEE Transactions on Signal Processing
The next-generation 4D imaging automotive radar is characterized by high angular resolution, unambiguous detection, low latency, low cost, and small size. This study provides an enhanced analysis of the angular ambiguity function (AAF) for planar MIMO arrays, and pioneers a method for a more accurate evaluation of angular resolution using the main lobe width (MLW). Then the 2D expanded beam pattern (EBP) is introduced to assess the field-of-view (FOV), region of interest (ROI), sidelobe level (SLL), and normalized resolution intuitively and precisely. After constructing the sophisticated 2D element spacing and aperture constraints for planar MIMO arrays, the optimization of array geometry is creatively formulated as a novel Domino sparse optimization problem aiming to minimize the MLW while sufficiently suppressing the SLL, which is inspired by the sequential fall of dominoes. This non-convex and non-smooth constrained problem is efficiently solved by a hybrid optimization framework, which integrates the alternating direction multiplier method (ADMM), aggregate function, modified real genetic algorithm (MGA), and non-uniform fast Fourier transform (NUFFT). Numerical simulations demonstrate that angular resolution varies with array geometry, even under the same aperture size. The proposed arrays outperform others with equal aperture size, exhibiting narrower MLW and lower Cramér-Rao bound (CRB), thereby enhancing angular resolution with fewer antennas and without preprocessing in standard single-snapshot 2D DOA estimation methods.
Context and location services become increasingly important in many Internet of Things (IoT) applications such as smart home, disaster assistance, security and safety in smart factory and so on. Traditionally, these services are provided by independent systems. In this paper, we propose a software defined radio (SDR) based multi-function radar for respiratory rate and moving speed detections as well as ranging, which can be used to provide human body detection and tracking in human-centric IoT applications. Since SDR concept is adopted, the same hardware platform could be shared with wireless communications periodically by re-defining. The system architecture design is introduced. The detection algorithms are presented. The ranging performance is compared with some typical ones using simulations. The detections for respiratory rate, ranging and moving speed are carried out on the SDR platform consisting of FMCOMMS5 and ZC706. The system occupies 2MHz bandwidth. It is shown that the proposed multi-function radar achieves the estimation of the human respiratory rate with <;5% errors compared to a clinic-grade device. The ranging resolution achieved is <;0.3 m. The tiny movement as slow as 0.19 m/s can be detected.
We proposed two methods for the localization of drone controllers based on received signal strength indicator (RSSI) ratios: the RSSI ratio fingerprint method and the model-based RSSI ratio algorithm. To evaluate the performance of our proposed algorithms, we conducted both simulations and field trials. The simulation results show that our two proposed RSSI-ratio-based localization methods outperformed the distance mapping algorithm proposed in literature when tested in a WLAN channel. Moreover, increasing the number of sensors improved the localization performance. Averaging a number of RSSI ratio samples also improved the performance in propagation channels that did not exhibit location-dependent fading effects. However, in channels with location-dependent fading effects, averaging a number of RSSI ratio samples did not significantly improve the localization performance. Additionally, reducing the grid size improved the performance in channels with small shadowing factor values, but this only resulted in marginal gains in channels with larger shadowing factors. Our field trial results align with the simulation results in a two-ray ground reflection (TRGR) channel. Our methods provide a robust and effective solution for the localization of drone controllers using RSSI ratios.
1 April 2024 in IEEE Transactions on Components, Packaging and Manufacturing Technology
77 GHz automotive Multiple Input Multiple Output (MIMO) radar is traditionally implemented in the bulky PCB board in a cascaded format to achieve a high resolution. This paper reports Mold-on-Mold Fan-Out Wafer-Level-Packaging (FOWLP) Antenna in Packages (AiP) technology to directly mold the Radar dies into the package while with the mold-on-mold advantage of integrating the antenna seamlessly on the top of the package. This process combined with the patented MIMO layout makes a high-resolution MIMO radar achievable in a very compact format: within a space of 64 mm × 32 mm × 0.7mm, two 32mm × 16mm AiPs and two 16mm × 16mm AiPs each carrying one transceiver die to target to achieve both Long Range Radar (LRR) and Medium Range Radar (MRR) functions with 1° angular resolution in both vertical and horizontal sensing operations. We disclose the FOWLP AiP structure and key design details to implement such MIMO radar, including AiP element and RF passive circuits modeling and test; The MIMO AiP performance is shown in terms of impedance bandwidth, patterns, feed line consistency, and isolations; the LRR and MRR MIMO detection range and resolution performance are finally evaluated.