Chun Wang

Mr. Chun Wang


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 July 2023 in Agriculture
Verified
Journal Article
Open access
PDF file
CWChun Wang
Chun Wang
YongChao ShaoYongChao Shao
YongChao Shao
YZYou Zhang
You Zhang
ZXZhi Xin
Zhi Xin
JCJian Chen
Jian Chen
Fuzeng YangFuzeng Yang
Fuzeng Yang
In this study, a comb-type buckwheat-harvesting device was designed and tested for use in hilly areas and on small plots of buckwheat in China. The device uses semi-feeding and allows for threshing before cutting. Through the parametric design of the threshing mechanism, a dynamic model of the comb teeth’s striking of buckwheat plants was established. The effect of the machine’s forward speed and the speed of the comb teeth on the threshing rate was explored via a single-factor experiment. Based on the simulation test and actual operations, an orthogonal experiment with three factors and three levels was performed, using the machine’s forward speed, the speed of the comb teeth, and the tilt angle of the threshing mechanism as the factors, and the threshing rate, breakage rate, and loss rate as the indicators. Regression equation models were established for the relationship between the influencing factors and the threshing rate, breakage rate, and loss rate, and a response surface analysis of the influencing factors and their interaction was carried out. The results showed that the speed of the comb tooth had the greatest influence on the threshing rate, breakage rate, and loss rate, followed by the machine forward speed; the tilt angle of the threshing mechanism had the least influence on the threshing rate, breakage rate, and loss rate. By optimizing the multi-objective parameters of the regression equation models, reasonable parameters were obtained for the influencing factors: the machine forward speed was 0.5 m/s, the speed of the comb teeth was 1.2 m/s, and the inclination of the threshing mechanism was 45°. Under these conditions, the threshing rate was 80.10%, the breakage rate was 1.83%, and the loss rate was 7.03%.

31 August 2025 in INMATEH Agricultural Engineering
Verified
Journal Article
Closed access
CWChun Wang
Chun Wang
XLXiangyang Liu
Xiangyang Liu
YSYongchao Shao
Yongchao Shao
WZWeiguo Zhang
Weiguo Zhang
To address the lack of contact parameters for yanhusuo during the mechanization process, its basic physical and contact parameters were derived through both theoretical calculations and practical measurements. Utilizing 3D scanning technology, a 3D model of yanhusuo was obtained. A discrete element model was then established using an automatic filling method. The key factors influencing the stacking angle of yanhusuo were identified using Plackett-Burman tests. The optimal ranges for these factors were determined through the steepest ascent experiment, and a quadratic regression model for the stacking angle was developed using response surface methodology (RSM) based on a rotational orthogonal experimental design. The optimized parameters - a restitution coefficient of 0.481, static friction coefficient of 0.508, and rolling friction coefficient of 0.029 - yielded a stacking angle of 21.23°. Experimental validation showed a relative error of just 0.86% between the simulation and physical tests. These results demonstrate that the discrete element model and calibrated parameters closely replicate real-world conditions, providing valuable insights for the mechanical design of yanhusuo planting and harvesting equipment.