Porous silicon (PSi) is used as an effective material in biomedicine, sensors, solar cells, electrochemical energy, microelectronics, and nanotechnology. Considering the dependence of PSi functional properties on pore geometry and porous layer architecture, it is important to develop methods for controlled pore formation. After all, in the procession the method of obtaining PSipore geometry and architecture of PSifunctional properties of PSi, the decisive role belongs to the first participant. Among the most used methods, electrochemical etching is the most suitable for the controllability of the processes of nucleation and growth of pores since it can be controlled using the value of the current density, and the results are easily reproduced. This work analyses the literature on two types of electrochemical formation of PSi by anodic etching of (1) silicon surface and (2) silicon surface, modified with metal nanostructures. A modern explanation of the process of anodic dissolution of silicon with forming a porous surface in solutions containing HF is presented. The influence of such main factors on the process of anodic formation of PSi and its morphology is analyzed: the composition of the electrolyte and the role of each component in it; anode current density and methods of its supply (stationary, pulsed); duration; exposure to lighting; and temperature. Considerable attention is paid to the illustration of the role of alcohols and organic aprotic solvents on the formation of pore geometry. The influence of MNPs and metallic nanostructures on the process of localized metal-activated anodic etching of a semiconductor is analyzed.
An annual increase of CO2 concentrations in the atmosphere causes global environmental problems, addressed by systematic research to develop effective technologies for capturing and utilizing carbon dioxide. Electrochemical catalytic reduction is one of the effective directions of CO2 conversion into valuable chemicals and fuels. The electrochemical conversion of CO2 at catalytically active electrodes in aqueous solutions is the most studied. However, the problems of low selectivity for target products and hydrogen evolution are unresolved. Literature sources on CO2 reduction at catalytically active cathodes in nonaqueous mediums, particularly in organic aprotic solvents, are analyzed in this article. Two directions of cathodic reduction of CO2 are considerednonaqueous organic aprotic solvents and organic aprotic solvents containing water. The current interpretation of the cathodic conversion mechanism of carbon (IV) oxide into CO and organic products and the main factors influencing the rate of CO2 reduction, Faradaic efficiency of conversion products, and the ratio of direct cathodic reduction of CO2 are given. The influence of the nature of organic aprotic solvent is analyzed, including the topography of the catalytically active cathode, values of cathode potential, and temperature. Emphasis is placed on the role of water impurities in reducing CO2 electroreduction overpotentials and the formation of new CO2 conversion products, including formate and H2.
19 October 2021 in Bioinorganic Chemistry and Applications
The great demand for functional, particularly biologically active, metal nanoparticles has led to the search for technologically effective, green, and controlled methods of synthesizing these metal nanoparticles. Plasma glow discharge is one of the most promising techniques in this direction. The results of studies based on the synthesis of colloidal solutions of stabilized silver nanoparticles (AgNPs) by the microplasma method in solutions of a nontoxic surfactant sodium polyacrylate (NaPA) are presented. It is shown that AgNPs with a size of 220nm are formed in solutions of 0.050.2mmolL−1 AgNO3+5gL−1 NaPA at U=250V by tungsten cathode plasma glow discharge. At 20°C, the yellow solutions are formed with λmax410nm, which are stable during long-term storage. It was found that the process of AgNPs formation corresponds to a first-order reaction on the AgNO3 concentration. Its value has little effect on the geometry of nanoparticles, so the Ag(I) concentration in solution is one of the main factors influencing the rate of microplasma synthesis of AgNPs. The antimicrobial activity of synthesized AgNPs solutions against strains of Escherichia coli, Staphylococcus aureus, and Candida albicans was established.
15 September 2018 in Chemistry & Chemical Technology