Many manual calculations and repeated modeling are required during the traditional structural design process. However, due to the high cost, rural buildings in China cannot be professionally designed and verified by designers as urban buildings, and their safety and economy cannot easily meet the requirements. Building Information Modeling (BIM) technology and intelligent optimization algorithms can effectively improve the structural design process and reduce design costs, but their applications in the field of rural residential buildings in China are limited. Therefore, this paper presents an innovative framework that realizes the structural design of rural light steel frame structures on the BIMBase platform (widely used BIM software in China, BIMBase 2023R1.3). Based on the parametric library of structural components built on standardized component coding, the framework completes the rapid modeling of rural light steel frame structures and the interaction between the BIMBase platform and structural analysis software, SATWE. The improved two-stage simulated annealing (SA) algorithm is applied to the structural design of rural buildings to obtain a design scheme that meets the design requirements and reduces the material consumption as much as possible. Two prefabricated rural light steel frame structures were analyzed to evaluate the efficiency of the proposed framework. The results show the feasibility of the proposed framework. Compared with traditional manual design methods, the design period can be reduced by six times while maintaining comparable levels of material consumption and structural design indicators.
1 December 2021 in Journal of Constructional Steel Research
Beam–slab structures account for 50–65% of a building’s total dead load and contribute to 20% of the overall cost and CO2 emissions. Despite their importance, conventional beam–slab structural optimization methods often lack search efficiency and accuracy, making them less effective for practical engineering applications. Such limitations arise from the optimization problem involving a complex solution space, particularly when considering components’ arrangement, dimensions, and load transfer paths simultaneously. To address the research gap, this study proposes a novel two-stage genetic algorithm, optimizing beam–slab layout in the first stage and component topological relationships and dimensions in the second stage. Numerical experiments on the prototype case indicate that the algorithm can generate results that meet engineering accuracy requirements within 100 iterations, outperforming comparable algorithms in both efficiency and accuracy. Additionally, this heuristic approach stands out for its independence from prior dataset training and its minimal parameter adjustment requirement, making it highly accessible to engineers without programming expertise. Statistical analysis of the algorithm’s optimization process and case studies demonstrate its robustness and adaptability to various beam–slab structural optimization problems, revealing its significant potential for practical engineering scenarios.
This study addresses thermal comfort challenges in enclosed, high-occupancy metro carriages through systematic optimization of impinging jet ventilation parameters. Numerical simulations, validated by full-scale experiments, employed the Fiala Thermoregulation Model and Equivalent Homogeneous Temperature model for comprehensive thermal comfort evaluation. A total of 100 operating conditions were analyzed to investigate the effects of supply airflow rate, temperature, and vent height. The optimization identified two distinct locally optimal strategies (OS 1 and OS 2): a low-flow rate, low-temperature configuration (1.639 kg/s, 20.80 °C, 0.0839 m) and a high-flow rate, high-temperature configuration (2.519 kg/s, 23.19 °C, 0.0729 m). The existence of multiple optima provides operational flexibility for secondary objectives such as energy efficiency and noise reduction. Parameter sensitivity analysis established airflow rate and temperature as the dominant factors influencing thermal comfort, providing crucial guidance for control system design. Both optimal configurations achieve uniform thermal environments without draught risk while fully complying with vertical temperature standards, effectively eliminating concerns about foot-level overcooling. Comparative analysis reveals that OS 1 excels at overall performance in thermal regulation and reduces energy consumption by 13.45%, whereas OS 2 offers advantages in minimizing vertical temperature differences. This integrated assessment provides a solid basis for selecting more reliable and comprehensive parameter design solutions.
Icons are integral to the signature systems within architectural spaces, serving pivotal roles through human–environment interactions. However, previous icon designs often exhibited a considerable randomness and neglected the needs of visually impaired individuals. To address these issues and to overcome the limitations of the computer-aided design methods, such as most of them focusing only on text design which are not compatible with icons, this study presents an intelligent assistance method named “Universal Colour” for icon colour design based on universal design principles. Such a system enables the rapid generation of icon colour schemes and supports visual and quantitative filtering and comparison during the decision-making process for colour scheme optimization. To assess its usability, fifty-two participants conducted icon colour design experiments using this system, resulting in 87% of the design schemes meeting the universality requirements. The results have demonstrated that Universal Colour has the potential to significantly enhance efficiency and cognitive aspects within the decision-making process for users, regardless of their proficiency in icon design, thereby facilitating the generation of universal icon colour schemes in architectural design.