Charge time has become one of the primary issues restricting the development of electric vehicles. To counter this problem, an adapted thermal management system needs to be designed in order to reduce the internal thermal gradient, by predicting the surface and internal temperature responses of the battery. In this work, a pseudo 3D model is developed to simulate battery cell performance and its internal states under various operational scenarios such as temperature and convection conditions as well as the applied current during charge and discharge. An original mesh of the JR is proposed where heat exchanges in the three directions (radial, orthoradial and axial) are considered. The model represents one of the solutions that enable increasing the lifespan of batteries while decreasing charging time. It offers the opportunity to optimize operating parameters to extend battery life. In this paper, attention was paid not only to the core and non-core components, but also to the experiments required to parametrize the thermal and electrochemical models (heat generation). Unlike existing approaches documented in the literature, the model developed in this work achieves an impressive balance between computational efficiency and result accuracy, making it a groundbreaking contribution in the field of electric vehicle technology.

In contemporary vehicle applications, lithium-ion batteries have become a leading option among the diverse array of battery technologies available. This preference is attributed to their advantageous properties, which include low self-discharge rates and no memory effect. Despite these benefits, lithium-ion batteries are not without their challenges. The key issues include a restricted driving range, concerns regarding longevity, safety risks, and prolonged charging durations. Efforts aimed at minimizing the charging duration frequently entail the introduction of elevated currents into the battery, a practice that can significantly elevate its temperature and, in turn, diminish its operational lifespan. Generally, battery packs in electric vehicles are equipped with flat cooling plates located on their side or bottom surfaces, which also serve the dual purpose of providing heating in colder conditions. Nevertheless, this cooling configuration faces difficulties during fast charging and may not efficiently heat or cool the batteries. In this work, a novel thermal management approach is proposed, in which a battery module is cooled not only with a bottom cooling plate but also using another cooling plate in contact with the busbars, located on the top of the battery module. The simulations and experimental tests show that this new configuration demonstrates significant improvements. The thermal time constant is reduced by 47%, enabling faster cooling of the module. Additionally, the maximum temperature reached by the battery during charging with dual cooling is lowered by 6 °C compared to the conventional approach. In this configuration, the top cooling plate acts as a thermal bridge. This is a key advantage that promotes temperature homogenization within the battery module. As a result, it supports an even aging process of batteries, ensuring their longevity and optimal performance.