Since the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for the third data-taking period of the CERN LHC, Run 3, which started in 2022. The entire silicon pixel tracking detector was replaced. A new powering system for the superconducting solenoid was installed. The electronics of the hadron calorimeter was upgraded. All the muon electronic systems were upgraded, and new muon detector stations were added, including a gas electron multiplier detector. The precision proton spectrometer was upgraded. The dedicated luminosity detectors and the beam loss monitor were refurbished. Substantial improvements to the trigger, data acquisition, software, and computing systems were also implemented, including a new hybrid CPU/GPU farm for the high-level trigger.
Sodium iodide (NaI)-based cryogenic scintillating calorimeters using quantum sensors for signal readout have shown promising first results toward a model-independent test of the annually modulating signal detected by the DAMA/LIBRA dark matter experiment. The COSINUS Collaboration has previously reported on the first above-ground measurements using a dual-channel readout of phonons and light based on transition edge sensors (TESs) that allows for particle discrimination on an event-by-event basis. In this article, we outline the first underground measurement of a NaI cryogenic calorimeter readout via the novel remoTES scheme. A 3.67 g NaI absorber with an improved silicon light detector design was operated at the Laboratori Nazionali del Gran Sasso, Italy. A significant improvement in the discrimination power of events to nuclear recoils was observed with a fivefold improvement in the nuclear recoil baseline resolution, achieving . Furthermore, we present a limit on the spin-independent dark matter nucleon elastic scattering cross section, achieving a sensitivity of with an exposure of only 11.6 g d.
24 September 2019 in The European Physical Journal C
We report on a search for double beta decay of $$^{130}\hbox {Te}$$ to the first $$0^{+}$$ excited state of $$^{130}\hbox {Xe}$$ using a $$9.8\,\hbox {kg}\cdot \hbox {yr}$$ exposure of $$^{130}\hbox {Te}$$ collected with the CUORE-0 experiment. In this work we exploit different topologies of coincident events to search for both the neutrinoless and two-neutrino double beta decay modes. We find no evidence for either mode and place lower bounds on the half-lives: $$T^{0\nu }_{0^+_1}>7.9\cdot 10^{23}\hbox {yr}$$ and $$T^{2\nu }_{0^+_1}>2.4\cdot 10^{23}\hbox {yr}$$ ( $$90\%\,\hbox {CL}$$ ). Combining our results with those obtained by the CUORICINO experiment, we achieve the most stringent constraints available for these processes: $$T^{0\nu }_{0^+_1}>1.4\cdot 10^{24}\hbox {yr}$$ and $$T^{2\nu }_{0^+_1}>2.5\cdot 10^{23}\hbox {yr}$$ ( $$90\%\,\hbox {CL}$$ ).
Ensuring the radiation hardness of PbWO4 crystals was one of the main priorities during the construction of the electromagnetic calorimeter of the CMS experiment at CERN. The production on an industrial scale of radiation hard crystals and their certification over a period of several years represented a difficult challenge both for CMS and for the crystal suppliers. The present article reviews the related scientific and technological problems encountered.