Despite the wide application of hydraulic fracturing in enhanced geothermal system (EGS) development and unconventional hydrocarbon production, our understanding of the many factors affecting the propagation of hydraulic fractures has relied on circumstantial evidence. This is partly due to the scarcity of direct observations in the subsurface. The EGS Collab project attempts to address this issue in the context of EGS research by performing intermediate-scale (∼10 m) hydraulic stimulation experiments in a thoroughly characterized and heavily instrumented underground testbed. This paper analyzes the data collected from the first suite of hydraulic fracturing tests in this testbed, consisting of seven stimulation episodes. High-quality microseismic data delineate five planar features very clearly. Combining fracture-wellbore intersection observations from distributed temperature sensing (DTS) and visual observations from an open-hole well, as well as prior in situ stress measurements, we conclude with high certainty that the four larger planes were hydraulic fractures. The growth of the hydraulic fractures was temporarily halted by a prominent, open natural fracture in the testbed but they eventually crossed and slightly reoriented under continued stimulation. Mineral-filled (i.e. healed) natural fractures, though prevalent in the testbed, did not have perceivable effects on hydraulic fracture propagation. The high quality, mutually corroborating datasets allowed conclusions to be drawn with high confidence and attests to the advantage of intermediate-scale experiments in subsurface research.
Fluid flow through fractured rock systems is governed in large part by the distribution, interconnectivity, and size of fracture apertures. In‐situ stress is one of the primary factors controlling fracture aperture, and one that is altered significantly during high‐pressure fluid injections or extractions. Interactions between stress, pore pressure, aperture, and fluid flow can result in complex and evolving poroelastic behavior with significant implications regarding the predictability and risk involved with developing and managing deep subsurface reservoirs (geothermal, fossil energy, and geologic carbon sequestration). In saturated rocks, bulk electrical conductivity is sensitive to both primary and secondary porosity (i.e., matrix porosity and fractures), and therefore to fracture aperture size and distribution. We demonstrate the use of time‐lapse 3D electrical resistivity tomography for remotely monitoring stress induced changes in aperture distribution during high pressure injections into a dense fractured rock system at a scale of tens of meters. Results reveal a complex and continuously evolving stress field involving aperture dilations in the natural fracture system and aperture contractions in adjacent zones of shadow stress. Results provide information about the spatiotemporal changes in the system behavior and point to the potential of electrical imaging for autonomously and remotely monitoring evolving stress conditions by proxy through changes in bulk electrical conductivity.
The geologic storage of carbon dioxide ( ) is one method that can help reduce atmospheric by sequestering it into the subsurface. Large‐scale deployment of geologic carbon storage, however, may be accompanied by induced seismicity. We present a project lifetime approach to address the induced seismicity risk at these geologic storage sites. This approach encompasses both technical and nontechnical stakeholder issues related to induced seismicity and spans the time period from the initial consideration phase to postclosure. These recommendations are envisioned to serve as general guidelines, setting expectations for operators, regulators, and the public. They contain a set of seven actionable focus areas, the purpose of which are to deal proactively with induced seismicity issues. Although each geologic carbon storage site will be unique and will require a custom approach, these general best practice recommendations can be used as a starting point to any site‐specific plan for how to systematically evaluate, communicate about, and mitigate induced seismicity at a particular reservoir.
19 March 2018 in Rock Mechanics and Rock Engineering