In the past decade, in the context of the carbon peaking and carbon neutrality era, the rapid development of new energy vehicles has led to higher requirements for the performance of strike forces such as battery cycle life, energy density, and cost. Lithium-ion batteries have gradually become mainstream in electric vehicle power batteries due to their excellent energy density, rate performance, and cycle life. At present, the most widely used cathode materials for power batteries are lithium iron phosphate (LFP) and LixNiyMnzCo1−y−zO2 cathodes (NCM). However, these materials exhibit bottlenecks that limit the improvement and promotion of power battery performance. In this review, the performance characteristics, cycle life attenuation mechanism (including structural damage, gas generation, and active lithium loss, etc.), and improvement methods (including surface coating and element-doping modification) of LFP and NCM batteries are reviewed. Finally, the development prospects of this field are proposed.
6 September 2024 in Materials Science and Engineering: A
LiNi0.8Co0.1Mn0.1O2 (LNCMO) cathode materials for lithium-ion batteries (LIBs) were prepared by the hydrothermal synthesis of precursors and high-temperature calcination. The effect of precursor hydrothermal synthesis temperature on the microstructures and electrochemical cycling performances of the Ni-rich LNCMO cathode materials were investigated by SEM, XRD, XPS and electrochemical tests. The results showed that the cathode material prepared using the precursor synthesized at a hydrothermal temperature of 220 °C exhibited the best charge/discharge cycle stability, whose specific capacity retention rate reached 81.94% after 50 cycles. Such enhanced cyclic stability of LNCMO was directly related to the small grain size, high crystallinity and structural stability inherited from the precursor obtained at 220 °C.
In the past decade, under the background of the carbon peaking and carbon neutrality era, the rapid development of new energy vehicles has put forward higher requirements for the performance of strike forces such as battery cycle life, energy density and cost. Lithium-ion batteries have gradually become the mainstream of electric vehicle power batteries due to their excellent energy density, rate performance and cycle life. At present, the most widely used cathode materials for power batteries are lithium iron phosphate (LFP) and ternary nickel-cobalt-manganese (NCM). However, these materials exhibit the bottlenecks that limit the improvement and promotion of power battery performance. In this review, the performance characteristics, cycle life attenuation mechanism (including structural damage, gas generation and active lithium loss, etc.) and improvement methods (including surface coating and element-doping modification) of LFP and NCM batteries are reviewed. Finally, the development prospects of this field are proposed.
In order to study the flexural bearing capacity of integral abutment bridge's H-shaped steel pile-abutment joints, the bending models and bearing capacity calculation formulas corresponding to different failure modes of the joint are proposed by theoretical analysis. In addition, the theoretical calculation results is compared with test results, and the results show that the theoretical calculation formula can accurately predict the flexural bearing capacity of embedded H-shaped steel pile-abutment joints with different failure modes. The research results can provide reference for the analysis and design of abutment joints of integral abutment bridges.