Recently, there has been an upsurge in efforts dedicated to developing low-cost flexible electronics by exploiting innovative materials and direct printing technologies. This interest is motivated by the need for low-cost mass-production, shapeable, and disposable devices, and the rapid prototyping of electronics and sensors. This review, following a short overview of main printing processes, reports examples of the development of flexible transducers through low-cost inkjet printing technology.
In this work a novel inclinometer exploiting a magnetic fluid as the inertial mass and an optical readout strategy is addressed. In particular, the device behavior has been modeled and experimentally observed by mean of a dedicated set-up. The proposed inclinometer uses a 5 mm diameter glass pipe filled with water and a drop of ferrofluid, a retaining mechanism based on a permanent magnet and an infrared readout strategy. The latter is used to measure the position of the inertial mass inside the pipe, which is strictly correlated to the sensor inclination. Main outcomes of the sensing solution proposed consist in the use of passive restoring mechanism and an IR (InfraRed) sensing strategy, which is convenient in terms of power budget as respect to sensors exploiting electromagnetic readout strategy and powered restoring mechanism acting on the inertial mass. The developed lab-scale prototype exhibits an operating range of ±15°, a responsivity of 0.56 V/° and a resolution of 0.25°, as well as a span-to-threshold value of 120.
This paper deals with the prototyping and a preliminary characterization of a novel inclinometer exploiting magnetic fluids and an optical readout strategy. The proposed inclinometer consists of a 5 mm diameter glass pipe containing a ferrofluid drop, a permanent magnet to generate a retaining force on the ferrofluidic drop and an infrared (IR) readout strategy to detect the ferrofluid position inside the pipe. The latter is correlated to the glass pipe tilt. The main advantages of the sensor proposed, with respect to previous devices already available in the literature, consist in the use of a permanent magnet to control the ferrofluid mass position and the adopted IR readout strategy, which produce a meaningful reduction of the power consumption, as respect to systems using an inductive readout strategy and the active control of the inertial mass. Features obtained by the experimental characterization of the prototype developed encourages the use of the sensing methodology proposed and the development of devices exploiting the sensing approach above mentioned.
People with visual disabilities still may have needs to recognize specific locations while exploring unfamiliar environments. Moreover, they are often challenged by places not designed for their special conditions creating navigation challenges in reaching specific destinations. Despite many solutions have been proposed to address orientation in indoor and outdoor environments, a number of limitations can limit their use and user acceptability, such as complexity, wearable-less and costs. In this paper an orientation system based on RFID technology is proposed, which may provide help to visually impaired in performing environment exploration and finding specific locations. The idea is to create a wearable device, non-invasive and ease-to-use, which is able to provide in real-time useful information to end users through electronic way-points about services or routings along their own path. The system uses transparent RFID tags positioned in the environment and an embedded system including a RFID reader as well as an audio module to convey audio message to end users. Performances of the system have been assessed through several investigations aimed to optimize the system layout, as well as the working conditions of the proposed solution.