In this paper, an overlapping coalition formation game is proposed to conduct joint interference management and resource allocation in device-to-device (D2D) communications. We aim at improving the sum rate of all D2D links in D2D communications underlying cellular network without sacrificing the quality of service of each cellular user (CU) and D2D link. First, based on the cross-tier interference level between CUs and D2D links, each D2D link selects multiple best resource blocks (RBs) to reuse. Then, by dividing the user equipments (i.e., CU and D2D links) which share the same RB into one coalition, an initial overlapping coalitional structure is formed. A cooperative game with overlapping coalitions is further proposed to maximize the system utility in terms of sum rate of all D2D links. Finally, the characteristic analysis of the proposed algorithm is provided to validate that the user equipments can cooperate to form a stable and most beneficial coalitional structure with overlapping coalitions. Simulation results show that the proposed overlapping coalition formation game achieves a better performance compared with other existing schemes.
In this paper, the artificial-noise (AN)-aided downlink distributed antenna system with simultaneous wireless information and power transfer is considered, in which the legitimate user uses the power-splitting (PS) scheme to simultaneously decode information and harvest energy. To prevent eavesdroppers from wiretapping the legitimate user, AN is transmitted with the confidential signal at the transmitter. The secrecy energy efficiency maximization (SEEM) problem is studied under the constraints of the minimum secrecy rate requirement, minimum required harvested energy, total radio frequency transmission power, and range of the PS ratio. Because of the coupling of variables, the formulated SEEM problem is non-convex and intractable. Then, a double-layer iterative optimization algorithm is proposed. The outer layer is a 1-D search algorithm for the introduced tight relaxation variable, whereas the inner one is based on the Dinkelbach method to address the fractional optimization problem. The closed-form expressions for the power of the transmitted confidential signal and AN power are further derived. The simulation results reveal the efficiency of the proposed algorithm and the advantage of AN in improving the system secrecy energy efficiency.
In this paper, the secure energy-efficient transmission problem for an artificial-noise (AN)-aided simultaneous wireless information and power transfer (SWIPT) and vehicle-to-infrastructure (V2I) communication system with the imperfect channel state information (CSI) is studied. The secure energy efficiency problem is formulated with the imperfect CSI, where the constraints contain the minimum secrecy rate request of the legitimate vehicle (LV), the minimum energy harvesting (EH) request, the maximum transmit power, and the power splitting (PS) value. By exploiting the maximum ratio transmission (MRT) scheme and the norm-bounded matrix theory, we convert the original intractable problem to a fractional optimization one with three variables. Then, a two-level optimization algorithm is presented for the nonconvex fractional optimization problem. By introducing an auxiliary slack variable, the first level problem can be solved via one-dimensional optimization algorithm. The second level fractional optimization problem was furhther converted into an integer optimization one by the Dinkelbach method, and the closed-form solutions of the transmit power and the AN power are provided. Simulation results are given to verify the performance of our presented algorithm.
In this paper, a cache-enabled wireless network with circuit power consumption is considered, and the strategy of joint transmission and local caching is studied. The optimization problem of energy consumption minimization is formulated, where the optimized variables include the transmission rate and the local caching rate. The constraint conditions contain the maximum data departure curve, the minimum data departure curve, and the range of the local caching rate. The original problem is intractable, and is transformed into a two-layer optimization one by variable substitution. Under given caching policy, the sufficient and necessary conditions for the optimal offline transmission strategy are deduced by using the transmission characteristics. Then an energy-efficient offline transmission strategy is proposed, and its optimality is proved. The simulation results are provided to verify the performance of the proposed strategy. The simulation results reveal the impact of the cache capacity and the file popularity on the energy consumption. Under the same conditions, the performance of the proposed strategy is better than that of the other known algorithms. The proposed strategy to energy-efficient communication is helpful for the future green communication.
The optimum energy efficient communication of a hybrid automatic repeat request (HARQ) system with Chase combining is studied in this paper. The proposed scheme minimizes the energy required to successfully deliver a bit from a source to its destination by identifying the optimum energy distribution, i.e., the sequence of transmission energy that should be employed during the retransmissions of a packet. The optimum energy distribution is calculated with a new backward sequential method, where the energy of the retransmission round k is expressed as a closed-form expression of the energy of the retransmission rounds i > k. The optimum design is performed by considering a wide range of practical system parameters, such as circuit power and coding in the physical layer, and frame length and protocol overhead in the media access control layer. Both analytical and simulation results demonstrate that the proposed scheme can achieve significant energy savings compared to conventional HARQ systems that employ equal energy in all retransmissions.
Ultra-reliable low-latency communication (URLLC) is an important application scenario in fifth generation (5G) communication. With the increasing deployment of 5G, spectrum resources are becoming increasingly scarce, and millimeter wave (mmWave) operating in a high frequency has garnered significant attention. However, the short wavelength of the mmWave makes the signals susceptible to fading. Precoding has emerged as a promising solution for mitigating the severe path loss in mmWave, which can enhance the system capacity and communication performance. In our system, an achievable rate maximization problem is established by jointly optimizing the analog and digital precoders at the base station, subject to the constraint of the total power and the constant modulus constraint of the subarrays. The simulation results demonstrate that the algorithm employed in our system can successfully solve the optimization problem in this new scenario. Furthermore, the subarray-structure hybrid precoder has a higher energy efficiency than that of a fully connected hybrid precoder or all-digital precoder. The proposed algorithm also outperforms the MM (Majorization–Minimization) algorithm.