An efficient and rapid method is reported for preparing ultra-fine and well-dispersed SnO2 nanoparticles in a large scale. A simple double hydrolysis reaction between SnO32− and Fe3+ ions was masterly used to form a stable colloid system, in which colloidal particles of H2SnO3 with negative charges and Fe(OH)3 with positive charges electrostatically interact with each other and form honeycomb-like “core–shell” units. Through the hydrothermal reaction, the units are easily transformed into SnO2@FeO(OH) structures. Ultra-fine and well-dispersed SnO2 particles with less than 6 nm diameter were finally obtained with a high yield by further etching using hydrochloric acid. When used as anode materials for lithium ion batteries, the ultra-fine SnO2 particles can be easily dispersed into the carbon networks originating from the carbon source of glucose during the hydrothermal reaction. Electrochemical tests confirmed that these ultra-fine SnO2/C materials were endowed with excellent cyclic stability and C-rate performance. Even at a 1.56 A g−1 (2C) high current density, the reversible capacity could be maintained at 710 mA h g−1 after 100 cycles owing to the ultra-fine particle size of SnO2 and the rich carbon networks.
In this paper, mesoporous CuO with a novel architecture was synthesized through a conventional hydrothermal approach followed by a facile sintering procedure. HR-TEM analysis found that mesoporous CuO with an interconnected pore structure has exposed high-energy crystal planes of (002) and (200). Theoretical calculations indicated that the high-energy crystal planes have superior adsorption capacity for H+ ions, which is critical for the excellent adsorption and remarkable photocatalytic activity of the anionic dye. The adsorption capacity of CuO to methyl orange (MO) at 0.4 g/L was approximately 30% under adsorption equilibrium conditions. We propose a state-changing mechanism to analyze the synergy and mutual restraint relation among the catalyst CuO, H+ ions, dye and H2O2. According to this mechanism, the degradation rate of MO can be elevated 3.5 times only by regulating the MO ratio in three states.
A novel structure of anatase TiO2, nanocone-like TiO2 (TiO2-NC), is successfully prepared by a simple liquid-phase deposition method and is used as an anode material. The morphology and spatial arrangement of the TiO2-NC greatly affects the lithium storage, and TiO2-NC achieves a sustained high lithium storage performance (254.7 mA h g−1, corresponding to Li0.76TiO2) by assembling the TiO2-NC into ordered spherical shells. The structural analysis shows that exposed {001} facets of nanosized TiO2-NC help to increase the surface area as well as shorten the diffusion path of lithium transport. Moreover, an ordered arrangement of the TiO2-NC with a channel structure can further increase the surface area and improve the diffusion of the electrolyte, hence enhancing the lithium storage. Electrochemical tests indicate that the bulk intercalation of lithium was accompanied by the phenomenon of interfacial lithium storage in the TiO2-NC. In addition, the polarization of the TiO2-NC hollow spheres is effectively inhibited due to the ordered structure providing comfortable channels for the ionic and electronic diffusion, which imparts improved rate performance.
11 May 2019 in Journal of Solid State Electrochemistry