Anbazhagan Nagadeepan

Mr. Anbazhagan Nagadeepan


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 July 2023 in Materials
Verified
Journal Article
Open access
PDF file
ANAnbazhagan Nagadeepan
Anbazhagan Nagadeepan
GJGovindarajalu Jayaprakash
Govindarajalu Jayaprakash
Vagheesan SenthilkumarVagheesan Senthilkumar
Vagheesan Senthilkumar
Machining titanium alloy (Ti6Al4V) used in orthopedic implants via conventional metal cutting processes is challenging due to excessive cutting forces, low surface integrity, and tool wear. To overcome these difficulties and ensure high-quality products, various industries employ wire electrical discharge machining (WEDM) for precise machining of intricate shapes in titanium alloy. The objective is to make WEDM machining parameters as efficient as possible for machining the biocompatible alloy Ti6Al4Vusing Box–Behnken design (BBD) and nondominated sorting genetic algorithm II (NSGA II). A quadratic mathematical model is created to represent the productivity and the quality factor (MRR and surface roughness) in terms of varying input parameters, such as pulse active (Ton) time, pulse inactive (Toff) time, peak amplitude (A) current, and applied servo (V) voltage. The established regression models and related prediction plots provide a reliable approach for predicting how the process variables affect the two responses, namely, MRR and SR. The effects of four process variables on both the responses were examined, and the findings revealed that the pulse duration and voltage have a major influence on the rate at which material is removed (MRR), whereas the pulse duration influences quality (SR). The tradeoff between MRR and SR, when significant process factors are included, emphasizes the need for a reliable multi-objective optimization method. The intelligent metaheuristic optimization method named nondominated sorting genetic algorithm II (NSGA II) was utilized to provide pareto optimum solutions in order to achieve high material removal rate (MRR) and low surface roughness (SR).

1 December 2024 in Materials
Verified
Journal Article
Open access
PDF file
Vagheesan SenthilkumarVagheesan Senthilkumar
Vagheesan Senthilkumar
ANAnbazhagan Nagadeepan
Anbazhagan Nagadeepan
IKIlavenil K K
Ilavenil K K
This study aims to optimize the Wire Electrical Discharge Machining (EDM) process parameters for aluminum 6061 alloy reinforced with Mg and MoS2 using the Box–Behnken (BBD) design and the non-dominated sorting genetic (NSGA-II) algorithm. The objective is to enhance the machining efficiency and quality of the composite material. The Box–Behnken (BBD) design was utilized to design a set of experiments with varying levels of process parameters, comprising pulse-on time, servo volt, and current. The material removal rate and surface roughness were considered as machining responses for optimization. These responses were measured and used to develop a mathematical model. The NSGA-II, a multi-objective optimization algorithm, was then applied to search for the optimal combination of process parameters that simultaneously maximizes the material removal rate and minimizes the electrode wear rate and surface roughness. The algorithm generated and evolved a set of Pareto-optimal solutions, providing a trade-off between conflicting objectives. The results of the optimization process were analyzed to identify the optimal process parameters that lead to improved machining performance. The study revealed optimal Wire Electrical Discharge Machining (WEDM) parameters for Al6061/Mg/MoS2 composites using NSGA-II. The optimized parameters, including a pulse-on time (Ton) of 105 µs, servo voltage (SV) of 35 V, and peak current (PC) of 31 A, resulted in a Material Removal Rate (MRR) of 7.51 mm3/min and a surface roughness (SR) of 1.97 µm. This represents a 15% improvement in the MRR and a 20% reduction in the SR compared to non-optimized settings, demonstrating the efficiency of the BBD-NSGA-II approach.

16 June 2023 in Preprints.org
Verified
Preprint
Open access
PDF file
ANAnbazhagan Nagadeepan
Anbazhagan Nagadeepan
GJGovindarajalu Jayaprakash
Govindarajalu Jayaprakash
Vagheesan SenthilkumarVagheesan Senthilkumar
Vagheesan Senthilkumar
Machining titanium alloy (Ti6Al4V) used in orthopedic implants by conventional metal cutting processes is challenging due to excessive cutting forces, low surface integrity and tool wear. To overcome these difficulties and for ensuring high-quality products, various industries employ wire electrical discharge machining (WEDM) for precise machining of intricate shapes in titanium alloy. The objective is to make WEDM machining parameters as efficient as possible for machining the bio-compatible alloy Ti6Al4V using box-behnken design (BBD) and Non-dominated Sorting Genetic Algorithm II (NSGA II). A quadratic mathematical model is created to represent the productivity and the quality factor (MRR and surface roughness) in terms of varying input parameters, such as pulse active (Ton) time, pulse inactive (Toff) time, peak amplitude (A) current and applied servo (V) voltage. The established regression models and related prediction plots provide a reliable approach for predicting how the process variables affect the two responses viz MRR and SR. The effects of four process variables on both the responses were examined, and the findings revealed that the pulse duration and voltage has a major influence on the rate at which material is removed (MRR) whereas pulse duration influence quality (SR). The trade-off between MRR and SR, when significant process factors are included emphasizes the need for a reliable multi-objective optimization method. The intelligent metaheuristic optimization method named non-dominated sorting genetic algorithm II (NSGA II) is utilized to provide pareto optimum solutions in order to achieve high material removal rate (MRR) and low surface roughness (SR).

24 July 2026 in Automation
Verified
Journal Article
Open access
PDF file
ANAnbazhagan Nagadeepan
Anbazhagan Nagadeepan
Vagheesan SenthilkumarVagheesan Senthilkumar
Vagheesan Senthilkumar
IKIlavenil K K
Ilavenil K K
Advanced aerospace alloys such as titanium alloy (Ti-6Al-4V) are widely employed in critical applications owing to their excellent strength-to-weight ratio and corrosion resistance. However, machining these alloys remains challenging due to significant tool wear, poor material removal rates, and surface integrity concerns. This research offers a sustainable and intelligent machining framework for a 3 mm thick Ti-6Al-4V alloy, utilizing coated wire electrical discharge machining (WEDM) linked with Multi-Agent Deep Reinforcement Learning (MADRL). A Box–Behnken experimental design was adopted to gather baseline data for pulse-on time, pulse-off time, servo voltage, and peak current. The MADRL architecture combines cooperative agents to improve MRR, surface roughness, and kerf width concurrently. Beyond performance increase, the sustainability parameters of energy consumption, dielectric fluid use, and wire consumption were also studied. The proposed MADRL significantly improved the material removal rate (MRR) from 1.00 to 1.28 mm3/min and reduced the average surface roughness (Ra) from 1.95 to 1.66 µm, the kerf width from 0.27 to 0.24 mm, and the energy consumption from 122 to 107 J. The results show the potential of the proposed framework for adaptive, sustainable, and high-performance aerospace manufacturing.