A Fe-N conjugated organic polymer (SMP-Fr-Py) was prepared from ferrocene and pyrrole using a Scholl coupling reaction, which significantly improved the performance of Cr(VI) removal compared to the polymer (HCP-Fr-Py) prepared by adding the cross-linker formaldehyde dimethyl acetal (FDA). The results showed that at a pH of 2 and at 25 °C, the removal of Cr(VI) reached 90% for SMP-Fr-Py and only 58% for HCP-Fr-Py after 20 min of reaction. Subsequently, 99% and 78% were achieved after 120 min of reaction, respectively. The test results showed that the removal reaction followed a pseudo-second-order kinetic model. The removal efficiency decreased with increasing solution pH and initial Cr(VI) concentration, but increased with increasing SMP-Fr-Py dosage, reaching three cycles. The characterization of the reaction complexes and measurements of Cr species conversion revealed the near absence of Cr(VI) species in the solution. Approximately 38% of Cr(VI) was found to be adsorbed on the material surface, with another fraction present in solution (24%) and on the material surface (38%) in the form of Cr(III). The overall study showed that the direct connection of ferrocene and pyrrole in SMP-Fr-Py through C-C bonding increased the conjugated structure of the polymer backbone, which facilitated electron transfer and transport. Furthermore, the Fe-N elements worked synergistically with each other more easily, which improved the removal performance of Cr(VI) and provided a reference for the subsequent work.
A spherical porphyrin polymer-supported cobalt nano-catalyst P-TPP-Co(II) was synthesized using a simple method that does not require additional reduction or pyrolysis steps, where P-TPP is tetraphenyl porphyrin polymer. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) analyses demonstrated that Co ions were reduced in situ on the surface of the porphyrin polymer microspheres during the reduction experiment, and nanoflower structures were grown. The catalyst exhibited high catalytic activity for the hydrogenation of 4-nitrophenol under mild conditions, with a first-order reaction rate constant of 0.274 min−1. Experimental results confirmed that Co played a crucial role in the catalytic reaction. The high performance observed can be attributed to the unique properties of the Co nanoflower catalyst structure and the synergistic effects between Co elements and porphyrin polymers. This includes the strong adsorption capability of the spherical porphyrin polymer carrier for organic molecules and the excellent electrical conductivity of the porphyrin molecules to the Co nanoflower. Furthermore, the cobalt-based catalyst is relatively inexpensive and can be recycled up to six times, facilitating low-cost hydrogenation of 4-nitrophenol to 4-aminophenol. Additionally, in the catalytic degradation of Rhodamine B, the catalyst demonstrated good catalytic performance.