The influence of the process parameters, traverse, and rotational speeds of dissimilar friction stir welded joints of AA2024-O and AA6061-O aluminum alloys on the corrosion resistance was evaluated. Potentiodynamic tests using a 3.5% NaCl solution, open circuit potential, and polarization curves showed the corrosion behavior for the different welding parameters. These data were correlated with those obtained by mechanical tests (microhardness, tensile, and fracture analysis) and microstructure analysis by optical and scanning electron microscopy. It was observed that the combined effect of the parameters influenced the variation of corrosion resistance. This was evidenced mainly by the improvement of corrosion resistance at 1200 rpm–65 mm·min−1, which was related to the tendency of grain size and heat input presented. The corrosive attacks on the welded joints presented greater affectations in the presence of base material 1 (AA6061-O) with higher metallic dissolution. Corrosion attacks abovementioned were presented in different forms, such as pitting, localized, and selective, and they were observed by scanning electron microscopy. Finally, in corrosive and mechanical terms, the best performing condition was 1200 rpm and 65 mm·min−1 compared to the low parameter of 840 rpm and 45 mm·min−1.
24 January 2017 in Journal of Physics: Conference Series
Due to its outstanding properties, the titanium and its alloys have been widely used in the dental and orthopaedic fields as biomaterials. The TiO 2 nanotubes surface and the texturized process by laser engraving enables significantly accelerated osteoblast adhesion on the biomaterial. For this reason in this paper, the HOS cell responses on TiO 2 nanotubes fabricated on Ti6Al4V alloy and texturized by laser engraving were evaluated. The test surfaces were carried out on smooth Ti6Al4V as control, TiO 2 nanotubes (NT) and surfaces with micropoints obtained by laser engraving, with 1mm spacing (NTP1) and 0.5mm (NTP2). The results show that the texturized process enables decreases the contact angle thus improving wettability of the TiO 2 nanotubes surface. The NTP1 and NTP2 surfaces show excellent cell adhesion and spreading on the surface, which is evident in epifluorescence microscopy images. Furthermore, the NTP1 and NTP2 surfaces improved the cell proliferation at 18% and 16% respectively in relation with NT surface, showing that the laser texturing improves cell response of TiO 2 nanotubes.