The efficient and sustainable use of energy is highly imperative to satisfy the escalating energy demands arising from the rapid commercialization of technologies. The development of novel electrochemical energy technologies is an essential aspect in the present-day scenario of rapid depletion of existing sources of energy. Conducting polymers are promising psuedocapacitive materials with an extended delocalisation network of π electrons, flexibility to functional modifications and facile intercalation and de-intercalation of electrolyte ions. These factors enable them to possess capacitances comparable with those of metal oxides. The use of copolymers in this context is noteworthy due to their diversity of combining different types of monomer units and facile integration. Carbon based materials have also been extensively employed on account of their high power densities and large number of charge-discharge cycles. The synergism of the non-faradaic double-layer capacitance with the faradaic charge transfer has the ability to provide impressive supercapacitor properties. Different types of polymer and polymer-composites based supercapacitors have been discussed with special emphasis on implantable biomedical devices and wearable electronics.
Graphene–metal frameworks have been extensively studied and developed as electrode materials for next generation energy storage materials. Their high surface area and easily transformable structure enhances its specific capacitance characteristics. In the present study, graphene oxide (GO) was synthesized using Hummers method. Zinc oxide and copper oxide nanoparticles were incorporated in to the GO matrix to form mixed metal oxides. GO, GO–CuO and GO–ZnO were characterized using UV–Visible, FTIR, FT Raman spectroscopy, SEM and XRD to confirm their effective formation. The surface of the glassy carbon electrode was modified by drop casting with the samples on its surface and its electrochemical properties were studied. Cyclic Voltammetry studies were conducted at various scan rates in different electrolytes (KCl, H2SO4 and Na2SO4) and the characteristic curves were observed to be asymmetric in nature. GO–CuO exhibits the highest specific capacitance of 790 F/g at 5 mV/s in KCl. The specific capacitance of the modified electrodes was also measured using the Chronopotentiometry technique. GO–CuO nanocomposites show a maximum specific capacitance of 800 F/g at 1 A/g. The nanocomposites showed enhanced electrochemical behaviour of the nanocomposites when compared to pure GO. The nanocomposites also showed good cycling stability. The superior performance of the GO–CuO and GO–ZnO nanocomposite electrode renders it as a promising material for supercapacitors applications.
16 April 2024 in International Journal of Biological Macromolecules
There is an increasing demand for polymer nanocomposites that have optical transparency alongside high mechanical and thermal properties for specific applications. We report herein a series of optically clear addition cured polydimethylsiloxane (PDMS) nanocomposites that were prepared using a hydrosilylation method with poly(methy/vinyl)silsesquioxane (PMVS) nanospheres as a reinforcing agent and platinum as a catalyst. The PMVS nanospheres were synthesized via the hydrolytic condensation of organosilane as a precursor in the aqueous phase. The influence of the PMVS nanospheres on the morphology, mechanical properties, thermal stability, thermal conductivity, adhesive strength and optical transparency of these addition cured PDMS nanocomposites was studied in detail. It was observed that the tensile strength and thermal stability of the nanocomposites were enhanced upon the addition of PMVS nanospheres. These prominent improvements in the mechanical properties were attributed to the strong interactions between the PDMS chains and uniformly dispersed PMVS nanospheres in the polymer matrix. The optical transparency of the nanocomposites was not greatly affected by the incorporation of PMVS owing to the compatibility and low mixing viscosity of the nanocomposites. The lap shear strength of the PDMS nanocomposites on mild steel substrate shows significant enhancement when compared to the neat composite adhesive.