The application area of a sound insulation material is highly dependent on the technology adopted for its processing. In this study, thermoplastic rubber (TPR, polypropylene/ethylene propylene diene monomer) composites were simply prepared via an extrusion method. Two microscale particles, CaCO3 and hollow glass microspheres (HGW) were chosen to not only enhance the sound insulation but also reinforced the mechanical properties. Meanwhile, the processing capability of composites was confirmed. SEM images showed that the CaCO3 was uniformly dispersed in TPR matrix with ~3 μm scale aggregates, while the HGM was slightly aggregated to ~13 μm scale. The heterogeneous dispersion of micro-scale fillers strongly affected the sound transmission loss (STL) value of composites. The STL values of TPR composites with 40 wt % CaCO3 and 20 wt % HGM composites were about 12 dB and 7 dB higher than that of pure TPR sample, respectively. The improved sound insulation performances of the composites have been attributed to the enhanced reflection and dissipate sound energy in the heterogeneous composite. Moreover, the mechanical properties were also enhanced. The discontinued sound impedance and reinforced stiffness were considered as crucial for the sound insulation.
Polymer foams are promising for sound absorption applications. In order to process an industrial product, a series of polystyrene (PS) composite foams were prepared by continuous extrusion foaming assisted by supercritical CO2. Because the cell size and cell density were the key to determine the sound absorption coefficient at normal incidence, the bio-resource lignin was employed for the first time to control the cellular structure on basis of hetero-nucleation effect. The sound absorption range of the PS/lignin composite foams was corresponding to the cellular structure and lignin content. As a result, the maximum sound absorption coefficient at normal incidence was higher than 0.90. For a comparison, multiwall carbon nanotube (MWCNT) and micro graphite (mGr) particles were also used as the nucleation agent during the foaming process, respectively, which were more effective on the hetero-nucleation effect. The mechanical property and thermal stability of various foams were measured as well. Lignin showed a fire retardant effect in PS composite foam.
23 May 2025 in Journal of Environmental Chemical Engineering
2D Ag 2 SO 4 nanosheets have been delaminated from bulk Ag 2 S using a two-step combined exfoliation method. Upon blue light irradiation, the 2D Ag 2 SO 4 -based sensor exhibits high-performance responses toward low-concentrated NO 2 gas at room temperature.
1 January 2013 in Journal of Macromolecular Science, Part A
We reported controlled synthesis of methacrylic acid, 2-(diethylamino) ethyl methacrylate and 2-acrylamido-2-methyl-1-propa- nesulfonic acid (three electrolyte-type monomers) via reversible addition-fragmentation chain transfer (RAFT) polymerization with the chain transfer agent (CTA) (4-cyanopentanoic acid)-4-dithiobenzoate and initiator (I) 4,4′-azobis(4-cyanovaleric acid) in homogeneous aqueous media. Three distinct [monomer]0: [I]0: [CTA]0 ratios (50:0.2:1, 100:0.2:1, 500:0.2:1) were conducted. The polymerizations exhibited the characteristics of a controlled/“living” polymerization which demonstrated well-controlled molecular weight and low molecular weight distribution. Finally, the results of this investigation were used as a guide for the preparation of a series of well-defined polyelectrolytes (DPn = 50–500, PDI = 1.08–1.17) in high yield.