Multilevel inverters have been widely accepted for high-power high-voltage applications. Their performance is highly superior to that of conventional two-level inverters due to reduced harmonic distortion, lower electromagnetic interference, and higher dc link voltages. However, it has some disadvantages such as increased number of components, complex pulsewidth modulation control method, and voltage-balancing problem. In this paper, a new topology with a reversing-voltage component is proposed to improve the multilevel performance by compensating the disadvantages mentioned. This topology requires fewer components compared to existing inverters (particularly in higher levels) and requires fewer carrier signals and gate drives. Therefore, the overall cost and complexity are greatly reduced particularly for higher output voltage levels. Finally, a prototype of the seven-level proposed topology is built and tested to show the performance of the inverter by experimental results.
8 January 2011 in Energy Conversion and Management
Multi level inverters have been widely accepted for high power high voltage applications. Their performance is highly superior to conventional two level inverters in reduced harmonic distortion, lower EMI (electro magnetic interference) and higher DC link voltages. However it has some disadvantages as increased number of components, complicated PWM control method, and voltage balancing problem at neutral point. In this paper a new topology called reversing voltage (RV) is proposed to improve the multi level performance by compensating the disadvantages already mentioned. This topology requires less components compared to available inverters (especially in higher levels) and requires less carrier signals and does not need balancing of the voltages. The topology and the control method based on PD (phase disposition) SPWM are shown and the required components are also compared to other topologies to show the superiority of the topology. Finally, output voltage and currents are demonstrated by simulation.
21 October 2022 in IEEE Transactions on Intelligent Transportation Systems
Energy efficiency is one of the main issues in designing and operating different electrical systems. Energy-saving in electrical railway systems is an important concern due to the high amount of used energy. In order to find optimum energy consumption, different methodologies shall be examined. In addition, various affecting factors should be determined, and suitable solutions should be adopted. This paper illustrates that proper train scheduling is one of the effective approaches to optimize the system energy. Accordingly, comprehensive modeling is proposed considering different affecting factors such as the slope of different lines, the speed limits in each section, the time limit between the arrivals of trains to each station, and different modes of operation such as motoring and braking. Using the proposed model, an optimization problem with the objective function of energy-saving is solved. To evaluate the effectiveness of the proposed method, the proposed scheduling scheme is applied to Line 2 of Tehran Urban & Suburban Railway Operation Company. Based on the results, using the proposed scheme causes a 3.2% energy-saving compared to the existing train movement schedule in the same line. The proposed train movement scheduling program is proceeding to the last verification steps and will be used as a part of Tehran Metro navigation system in the near future.