In order to ensure the sustainable development of energy, the development of new power systems with a high penetration of renewable energy has become a key research direction in the field of power systems. This paper studies the system frequency response process and key indicators from the perspective of high-penetration renewable power systems and proposes an inertia and primary frequency response requirement assessment method for power system planning under high renewable penetration. First, by analyzing the frequency dynamic response process, the key parameters affecting frequency stability are determined, and the evolution trend of system inertia with increasing renewable penetration is analyzed. Second, based on the real-system data, the inertia and primary frequency response parameters for each generator are obtained. With the planning generation mix and load as the goal, whether the synchronous generators in the target system can meet the frequency stability requirements is determined. Finally, with the system inertia demand under the maximum rate of change of frequency (RoCoF) constraint as the starting point, we iteratively increase inertia and the primary frequency response capacity until the minimum matching configuration is found. The simulation results verify the correctness of the proposed assessment method. This method considers various processes in frequency response and multiple influencing factors, providing a practical evaluation tool for the inertia and primary frequency response requirements of high-penetration renewable power systems.
In response to the complexity and high volatility of original load data affecting the accuracy of load forecasting, a combined method for short-term load forecasting considering the characteristics of components of seasonal and trend decomposition using local regression (STL) is proposed. The original load data are decomposed into a trend component, seasonal component, and residual component using STL. Then, considering the characteristics of each component, a long short-term memory (LSTM) neural network, a convolutional neural network (CNN), and Gaussian process regression (GPR) are used to predict the trend component, seasonal component, and residual component, respectively. The final outcome of the load forecasting is obtained by summing the forecasted results of each individual component. A specific case study is conducted to compare the proposed combined method with LSTM, CNN, GPR, STL-LSTM, STL-CNN, and STL-GPR prediction methods. Through comparison, the proposed combined method exhibits lower errors and higher accuracy, demonstrating the effectiveness of this method.
This paper provides an optimization strategy for flexible operation at the system level to guide the real-time flexible ramping of the power grid. Firstly, the concept of regional power grid flexibility is clarified, and the ramping factor is proposed as a flexibility metric. On this basis, taking the output priority of each node as the objective function and considering constraints such as line flow, power balance, and system flexibility, a mathematical model for regional power grid transmitting flexible power externally is proposed. Compared with the traditional models, this model focuses more on flexibility rather than economy. A case analysis based on the improved IEEE 30-Bus System verifies the feasibility and effectiveness of the proposed strategy and its advantages over the traditional models.
This study addresses the integral role of typical wind power generation curves in the analysis of power system flexibility planning. A novel method is introduced for extracting these curves, integrating an enhanced K-means clustering algorithm with advanced optimization techniques. The process commences with thorough data cleaning, filtering, and smoothing. Subsequently, the refined K-means algorithm, augmented by the Pearson correlation coefficient and a greedy algorithm, clusters the wind power curves. The optimal number of clusters is ascertained through the silhouette coefficient. The final stage employs particle swarm and whale optimization algorithms for the extraction of quintessential wind power output curves, essential for flexibility planning in power systems. This methodology is validated through a case study involving wind power output data from a new energy-rich provincial power grid in North China, spanning from 1 January 2019, to 31 December 2022. The resultant curves proficiently mirror wind power fluctuations, thereby laying a foundational framework for power system flexibility planning analysis.