The ability of multiple manned and unmanned aircraft systems to cooperatively engage and disable an aerial threat plays a decisive role in modern warfare scenarios. In this paper, we apply key methods to enable the so-called cooperative threat engagement capability among multiple networked agents, e.g ., a swarm of drones, with combat and communication capabilities. In particular, this research combines AI-based decision-making and control techniques for a swarm of loyal wingman drones to coordinate efficient defense actions in a cooperative and autonomous manner.We apply these concepts in a defense scenario that is modeled to analyze the loyal wingman concept, which we consider an interesting testbed for cooperative decision-making and low-level control techniques. The investigated methods were implemented in a realistic 3D UAV simulator for demonstration and evaluation.
This paper is concerned with the collision avoidance for mobile robots with uncertain dynamics in the presence of obstacles that can considerably change their velocities over time. To address this problem, we propose a robust collision-avoidance method based on the continuous-control-obstacles one. The proposed method uses an arbitrary-order overdamped low-pass filter to generate sufficiently smooth position commands for the robot and a high-order sliding mode differentiator to robustly estimate the obstacles’ maximum accelerations. Based on these estimates, we define a set of possible future positions for the obstacles according to how each one is changing its velocity to calculate a robust position command for the robot. The method has been numerically evaluated using a conventional quadcopter flying among moving obstacles and has been shown to be effective in providing collision avoidance and velocity constraints satisfaction.
This paper is concerned with the attitude and position control of underactuated multirotor aerial vehicles in the presence of matched disturbances and uncertainties, using the hierarchical scheme that nests the attitude control loop inside the position one. It is well-known that the effectiveness of this scheme depends on a proper control tuning for achieving a sufficient time-scale separation (TSS) between the closed-loop (faster) rotational and (slower) translational dynamics. However, a TSS cannot be ensured under an ideal sliding mode position control law since the attitude command, computed from the position control signal, is infinitely fast. The present paper tackles this problem in a way to enforce TSS without losing robustness and using a dull trial-and-error tweak of gains. That is achieved by designing, on the one hand, a new adaptive integral sliding mode attitude control law (AISMAC) that, under a sufficient smooth attitude command, ensures the existence of an attitude sliding mode during all the time, including the adaptation phase, thus allowing an infinitely fast inner loop. On the other hand, the outer loop is equipped with a disturbance-observer-based proportional-derivative position control law that ensures the required smoothness of the attitude command and provides robustness with respect to unknown force terms. The proposed design is extensively evaluated in a realistic simulator and shows to effectively enforce the TSS.
This paper is concerned with the robust collision-free guidance and control of underactuated multirotor aerial vehicles in the presence of moving obstacles capable of accelerating, linear velocity and rotor thrust constraints, and matched model uncertainties and disturbances. We address this problem by using a hierarchical flight control architecture composed of a supervisory outer-loop guidance module and an inner-loop stabilizing control one. The inner loop is designed using a typical hierarchical control scheme that nests the attitude control loop inside the position one. The effectiveness of this scheme relies on proper time-scale separation (TSS) between the closed-loop (faster) rotational and (slower) translational dynamics, which is not straightforward to enforce in practice. However, by combining an integral sliding mode attitude control law, which guarantees instantaneous tracking of the attitude commands, with a smooth and robust position control one, we enforce, by construction, the satisfaction of the TSS, thus avoiding the loss of robustness and use of a dull trial-and-error tweak of gains. On the other hand, the outer-loop guidance is built upon the continuous-control-obstacles method, which is incremented to respect the velocity and actuator constraints and avoid multiple moving obstacles that can accelerate. The overall method is evaluated using a numerical Monte Carlo simulation and is shown to be effective in providing satisfactory tracking performance, collision-free guidance, and the satisfaction of linear velocity and actuator constraints.