It is well-known that practical vibro-impact systems are often influenced by random perturbations and external excitation forces, making it challenging to carry out the research of this category of complex systems with non-smooth characteristics. To address this problem, by adequately utilizing the stochastic response analysis approach and performing the stochastic response for the considered non-smooth system with the external excitation force and white noise excitation, a modified conducting process has proposed. Taking the multiple nonlinear parameters, the non-smooth parameters, and the external excitation frequency into consideration, the steady-state stochastic P-bifurcation phenomena of an elastic impact oscillator are discussed. It can be found that the system parameters can make the system stability topology change. The effectiveness of the proposed method is verified and demonstrated by the Monte Carlo (MC) simulation. Consequently, the conclusions show that the process can be applied to stochastic non-autonomous and non-smooth systems.
This paper designs an algorithm to distill the piecewise non-linear dynamical system from the data without prior knowledge. The system to be identified does not have to be written as a known model term or be thoroughly understood. We exploit the fact that an unknown piecewise non-linear system can be decomposed into the Fourier series as long as its equations of motion are Riemann integrable. Based on this property, we reduce the challenge of finding the correct model to discovering the Fourier series approximation. However, the Fourier series approximation of the piecewise function is inaccurate. The new method takes advantage of this weakness to determine whether the model has piecewise features and to find a way to discover the discontinuity set. Then, the dynamical system on each segment is identified as a pure Fourier series. Identification of intricate models can be achieved in simple steps. The results show that the method can accurately discover the equation of motion and precisely capture the non-smooth characteristic. Next, the prediction and further detailed analysis can be carried out.
30 September 2024 in Physica A: Statistical Mechanics and its Applications
Stochastic disturbances are everywhere. The influence of stochastic factors on the modeling and simulation of aircraft flight dynamics should be considered. Therefore, a stochastic differential equation for aircraft flight attitude is modeled based on the traditional one in this paper. After that, an identification method based on the idea of sparse recognition for unknown parameters and stochastic disturbance is proposed. Finally, a set of measured flight data is used to verify that the identified stochastic model has obvious advantages over the traditional deterministic model when the aircraft is maneuvering in flight. This method can improve the accuracy and reliability of the aircraft flight dynamic model.
28 February 2025 in International Journal of Bifurcation and Chaos