We present a robust technique for the analysis of shear wave splitting in layered anisotropic media by using converted shear phases. In (weakly) anisotropic media, the P-to-S converted phases (Ps) exhibit a distinct variation in arrival time (cosine moveout) as function of backazimuth. This variation can be exploited by time-shifting and stacking radial receiver functions to constrain a range of possible splitting parameters (i.e. the fast-polarization direction and the delay time) for an anisotropic layer. Then, the minimization of the transverse-component energy is used to select the pair of splitting parameters that best describes the anisotropic properties of the layer. This two-step approach stabilizes the inversion process and significantly reduces the time for computing the best splitting parameters. In multilayered anisotropic media, the distinct cosine moveout of the radial component is also observed for Ps phases from deeper discontinuities. The direct application of the method leads to apparent (or effective) splitting parameters for all anisotropic layers above the converting interface. Explicit expressions for the apparent splitting parameters are derived. The splitting parameters for the individual layers can be inferred by a layer-stripping approach, where the splitting effect due to shallower layers on converted phases from deeper discontinuities is successively corrected. In comparison to the approach by Liu & Niu (2012), the method represents a computationally efficient extension to multiple anisotropic layers. We further investigate the influences of noise, gaps in the azimuthal distribution of events, and interface dip on the splitting analysis. As an example, we apply the method to data from two stations of the Iranian National Seismic Network. At station GHIR the observed azimuthal variations of the Ps phase yield splitting parameters δt = 0.26 s and φf = 48° for a 48-km-thick crust. At station SHGR anisotropic effects on the Ps phases can be accounted for by two anisotropic crustal layers with a total thickness of 44 km. For the upper 22-km-thick layer we obtain a delay time δt1 = 0.25 s and a fast axis φ1 = 35°. Values for the lower layer are δt2 = 0.19 s and φ2 = −88°. The delay times correspond to anisotropies of about 4 and 3 per cent in the upper and lower layer, respectively. The method also provides a robust tool to separate the anisotropic properties of the crust and mantle and, thus, to isolate the anisotropic signature of mantle-deformation processes.
11 June 2018 in Journal of Geophysical Research: Solid Earth
We use a very large seismic data set to provide a comprehensive image of the mantle transition zone (MTZ) beneath the Middle East. We utilized the technique of Common Conversion Point stacking of P wave receiver functions to investigate the topography on the 410‐ and 660‐km discontinuities defining the upper and lower boundaries of the MTZ. Our results show significant topography on the 410‐ and 660‐km discontinuities and corresponding variations in the MTZ thickness. The MTZ topography is broadly consistent with the results of seismic tomography studies, implying the presence of both cold thermal anomalies imparted by detached Tethyan slabs and lithospheric segments and hot thermal anomalies induced by upwelling of lower mantle material. The MTZ topography in the northern Middle East is dominated by the presence of patches of cold material that are intermittently separated by regions of hot to normal MTZ. Our results suggest that instead of a continuous slab, the Tethyan slab in the Middle East is strongly segmented along the strike of the subduction boundary. Furthermore, we find evidence for a significant gap in subduction extending from the eastern edge of the Cyprean arc to NW Iran. The southern Middle East is dominated by the processes related to the mantle upwelling beneath the Afar depression. Our results imply that buoyant lower mantle material enters the MTZ beneath the Afar depression and then spreads laterally to the northeast beneath the western Arabia, flowing within the MTZ and in the upper mantle.
13 July 2022 in Journal of Geophysical Research: Solid Earth
The detection and rapid characterization of earthquake parameters such as magnitude are important in real‐time seismological applications such as Earthquake Monitoring and Earthquake Early Warning (EEW). Traditional methods, aside from requiring extensive human involvement can be sensitive to signal‐to‐noise ratio leading to false/missed alarms depending on the threshold. We here propose a multitasking deep learning model—the Convolutional Recurrent model for Earthquake Identification and Magnitude Estimation (CREIME) that: (a) detects the earthquake signal from background seismic noise, (b) determines the first P wave arrival time, and (c) estimates the magnitude using the raw three‐component waveforms from a single station as model input. Considering, that speed is essential in EEW, we use up to 2 s of P wave information which, to the best of our knowledge, is a significantly smaller data window compared to the previous studies. To examine the robustness of CREIME, we test it on two independent data sets and find that it achieves an average accuracy of 98% for event versus noise discrimination and can estimate first P‐arrival time and local magnitude with average root mean squared errors of 0.13 s and 0.65 units, respectively. We compare CREIME with traditional methods such as short‐term‐average/long‐term‐average (STA/LTA) and show that CREIME has superior performance, for example, the accuracy for signal and noise discrimination is higher by 4.5% and 11.5%, respectively, for the two data sets. We also compare the architecture of CREIME with the architectures of other baseline models, trained on the same data, and show that CREIME outperforms the baseline models.
22 June 2018 in Journal of Geophysical Research: Solid Earth
We determined radial anisotropy in the crust of southern Madagascar from the differences between the speeds of vertically and horizontally polarized shear waves (VSV and VSH), which we derived from Rayleigh and Love wave dispersion determined from seismic ambient noise correlations. The amalgamated Precambrian units in the east and the Phanerozoic Morondava basin in the west of southern Madagascar were shaped by different geodynamic processes. The crystalline basement was strongly deformed and metamorphosed to varying degrees during the assembly of Gondwana in the Pan‐African Orogeny, whereas the Morondava basin was completed with the separation of Africa and Madagascar. The different developments are reflected in first‐order differences in the radial anisotropy patterns. In the Precambrian domains, positive anisotropy (VSV<VSH) is found in the upper and lower crust, with a layer of negative anisotropy (VSV>VSH) sandwiched in between. The upper crustal anisotropy may reflect shallowly dipping layering within the Archean and adjacent imbricated nappe stacks, whereas the lower crustal anisotropy likely represents fossilized crustal flow during the postorogenic or synorogenic collapse of the Pan‐African Orogen. The negative anisotropy layer may have preserved vertically oriented large shear zones of late Pan‐African age. Within the Morondava basin, negative anisotropy in the uppermost ∼5 km could have been generated by steep normal faults, jointing, and magmatic dike intrusions. The deeper sediments and underlying crustal basement are characterized by positive anisotropy. This is consistent with horizontal bedding in the sediments and with fabric alignment in the basement created by extension during the basin formation.
27 September 2023 in Journal of Geophysical Research: Solid Earth
The European Alps formed at the boundary between the Eurasian plate and Adriatic microplate within a complex system of collision and subduction. However, the large‐scale three‐dimensional mantle‐flow field related to the underlying geodynamic processes has not yet been resolved in detail. In this study, we present the first comprehensive analysis of layered anisotropy for the complete Alpine range from shear‐wave splitting measurements at 591 seismic stations of the AlpArray experiment. Our findings suggest a combination of asthenospheric and distinct lithospheric contributions to the splitting observations, which can be seen as a generalization of previously reported models of single‐layer anisotropy. The enhanced vertical resolution exposes the impact of successive Mediterranean tectonic episodes, such as the opening of the Provençal‐Ligurian and Tyrrhenian Basins alongside the Adriatic slab retreat, as well as the Pannonian Basin opening and the Aegean slab retreat, resulting in deformation of the lithosphere and flow in the asthenospheric mantle. The dominant role of the larger scale Mediterranean subduction systems on mantle dynamics becomes evident. The observations provide supporting evidence that the Eurasian slab has broken off at its boundaries and that the resulting gaps channel flow from the mantle beneath the Eurasian plate to the Adriatic and Aegean subduction systems. The results provide new constraints on geodynamic processes involved in forming the European Alps, as previous tectonic episodes are preserved in the anisotropic fabric of the lithosphere‐asthenosphere system. This raises new questions regarding their geochemical and geophysical conditions, and their larger‐scale impact on the formation of the Alpine orogeny.
In this study, we determine spectral characteristics and amplitude decays of wind turbine induced seismic signals in the far field of a wind farm (WF) close to Uettingen, Germany. Average power spectral densities (PSDs) are calculated from 10 min time segments extracted from (up to) 6 months of continuous recordings at 19 seismic stations, positioned along an 8 km profile starting from the WF. We identify seven distinct PSD peaks in the frequency range between 1 and 8 Hz that can be observed to at least 4 km distance; lower-frequency peaks are detectable up to the end of the profile. At distances between 300 m and 4 km the PSD amplitude decay can be described by a power law with exponent b. The measured b values exhibit a linear frequency dependence and range from b=0.39 at 1.14 Hz to b=3.93 at 7.6 Hz. In a second step, the seismic radiation and amplitude decays are modeled using an analytical approach that approximates the surface wave field. Since we observe temporally varying phase differences between seismograms recorded directly at the base of the individual wind turbines (WTs), source signal phase information is included in the modeling approach. We show that phase differences between source signals have significant effects on the seismic radiation pattern and amplitude decays. Therefore, we develop a phase shift elimination method to handle the challenge of choosing representative source characteristics as an input for the modeling. To optimize the fitting of modeled and observed amplitude decay curves, we perform a grid search to constrain the two model parameters, i.e., the seismic shear wave velocity and quality factor. The comparison of modeled and observed amplitude decays for the seven prominent frequencies shows very good agreement and allows the constraint of shear velocities and quality factors for a two-layer model of the subsurface. The approach is generalized to predict amplitude decays and radiation patterns for WFs of arbitrary geometry.