The pressure distribution and the force on tunnel segments of synchronous grouting in the shield tail gap channel of shield tunnels are key to controlling the stability and surface settlement of the strata surrounding such tunnels. Based on the basic principles of fluid mechanics and the limit equilibrium method, this study establishes a mathematical model of synchronous grouting in shield tunnels, derives the expressions of the grouting pressure and the force on tunnel segments in the shield tail gap channel, and verifies them using an engineering case study. Studies have shown that the force on tunnel segments and the speed of shield excavation are increasing. An excessive shield excavation speed will cause the load on tunnel segments to increase, which exacerbates the uneven distribution of the grouting pressure. The force on tunnel segments and the grouting pressure also have a positive relationship with the thickness of the shield tail gap, but the impact is limited to a certain range. With an increase in the tunnel radius, the number of grouting holes should be appropriately increased to balance the water and soil pressure in the surrounding strata. These research results can provide a theoretical reference for the design of synchronous grouting for shield tunnels in the future.
Expansive soil near Hefei Xinqiao International Airport was selected as the research focus. The effects of different loading modes on the dynamic strain of the saturated remodeled expansive soil was investigated by indoor dynamic triaxial tests and the effect of three factors, intermittent loading ratio, static deviatoric stress, and cyclic stress ratio, on the accumulated plastic strain of saturated remodeled expansive soil under intermittent subway cyclic loading was analyzed. Finally, the corresponding accumulated plastic strain calculation model was established based on the test results. The research results show that the loading modes do not affect the overall development mode of the strain and, under intermittent loading, the strain tends to be more stable. Under intermittent loading, when the number of cycles is the same, the larger the intermittent loading ratio, the smaller the accumulated plastic strain. The effect of static deviatoric stress and cyclic stress ratio on strain accumulation is significant. Based on the hyperbolic model, an accumulated plastic strain calculation model related to the number of cycles of remolded expansive soil under the load of the Hefei subway was proposed, which has a certain reference significance for the design, safety assessment, and safe operation of the Hefei subway.
The coupling effect between slurry and a fractured rock layer controls the width of the fracturing channel and the grouting pressure. This effect is attenuated as the slurry diffusion front spreads from the grouting hole. This study examined the motion of slurry and the fracture expansion process, thereby establishing a longitudinal grout-splitting model of slurry-rock coupling by deriving a slurry-splitting diffusion motion equation that considers the time-varying viscosity of the slurry and attenuation of the fracture width. Research has demonstrated that in the initial stage of grouting, the plastic viscosity of the slurry is low, making grouting pressure and grouting rate the main determinants of the slurry’s splitting and diffusion range, as both factors can significantly expand the diffusion range of the slurry. However, once the viscosity of the slurry exceeds a certain threshold, viscosity becomes the primary factor that restricts the diffusion range of the slurry. Therefore, when using a slurry with time-varying viscosity, a higher initial grouting rate and grouting pressure should be selected in the early stages of grouting. As the grouting pressure stabilizes, the viscosity of the slurry should be appropriately increased to enable the slurry to quickly gel and seal the fractures.