The persistent free radical content in petroleum is of the order 1018 spins/g (1 μmol/g), with higher and lower values found depending on origin and in different distillation fractions. The field of persistent free radicals in petroleum was reviewed with the aim of addressing and explaining apparent inconsistencies between free radical persistence and reactivity. The macroscopic average free radical concentration in petroleum is persistent over geological time, but individual free radical species in petroleum are short-lived and reactive. The persistent free radical concentration in petroleum can be explained in terms of a dynamic reaction equilibrium of free radical dissociation and association that causes a finite number of species at any given time to be present as free radicals. Evidence to support this description are observed changes in free radical concentration related to change in Gibbs free energy when the bulk liquid properties are changed and responsiveness of free radical concentration to dynamic changes in temperature. Cage effects, solvent effects, steric protection, and radical stabilization affect free radical reaction rate but do not explain the persistent free radical concentration in petroleum. The difference between persistent free radicals in straight-run petroleum and converted petroleum is that straight-run petroleum is an equilibrated mixture, but converted petroleum is not at equilibrium and the free radical concentration can change over time. Based on the limited data available, free radicals in straight-run petroleum appear to be part of the compositional continuum proposed by Altgelt and Boduszynski. Persistent free radical species are partitioned during solvent classification of whole oil, with the asphaltenes (n-alkane insoluble) fraction having a higher concentration of persistent free radicals than maltenes (n-alkane soluble) fraction. Attempts to relate persistent free radical concentration to petroleum composition were inconclusive.
Phase instability that develops during thermal conversion of heavy oils and bitumen limits the extent of conversion in processes such as visbreaking. It was postulated that aromatic species with conjugated unsaturated systems extending beyond the aromatic rings likely contributed to reactions leading to phase instability, fouling, and coking. Many fluorophores have such conjugated π-electron systems. Three case studies were presented where products from thermal conversion were analyzed by fluorescence spectroscopy: (i) Cold Lake bitumen converted at 150–300 °C; (ii) asphaltenes depleted and enriched Athabasca bitumen converted at 380 °C; and (iii) Athabasca bitumen converted at 400 °C and 0.5–4.0 MPa. It was found that the fluorescence intensity of bitumen increased on thermal conversion. Fluorescence intensity increased in relation to reaction time for conversion at 150–300 °C, but it had a weak relationship with temperature. At 380 and 400 °C, this monotonic relationship was no longer apparent. There was no relationship with refractive index. Despite some overlap in fluorescence intensity values, 400 °C converted products obtained at 2.5–4.0 MPa had lower fluorescence intensity than products obtained at 0.5–2.0 MPa. Tentative explanations were offered for these observations. The change in fluorescence intensity with operating conditions and nature of the feed was consistent with the expected free radical concentration associated with the operating conditions and extent of hydrogen transfer. Although the study did not provide proof for the relationship between the fluorescence intensity and the concentration of aromatic species with conjugated unsaturated systems, the experimental observations were congruent with it.