Accurate estimation of offshore wind turbine (OWT) modal parameters has a prominent effect on the design loads, lifetime prediction, and dynamic response of the system. Modal parameters can vary during the operation of OWTs. This paper studies the variation and sensitivity analysis of an OWT’s modal parameters with respect to operational and environmental conditions. Three finite element models of a jacket-supported OWT at the Block Island Wind Farm are created within the OpenSees, SAP2000, and OpenFAST platforms and validated using experimental measurements. The OpenFAST model is used to simulate the modal parameters of the turbine under various wind speed, rotor speed, power, yaw angle, mean sea level, blade pitch angle, and soil spring values. The model-predicted modal parameters of the first fore–aft (FA) and side–side (SS) modes are compared to those identified from experimental measurements. Results from the simulations show that the first FA natural frequency and damping ratio mostly depend on the rotor speed and wind speed, respectively, while yaw angle and mean sea level do not have a visible effect. It is observed that there is about 8% stiffening in the first FA frequency and an aerodynamic damping of 7.5% during the operation of the OWT.

Offshore wind-turbine (OWT) support structures are subjected to cyclic dynamic loads with variations in loadings from wind and waves as well as the rotation of blades throughout their lifetime. The magnitude and extent of the cyclic loading can create a fatigue limit state controlling the design of support structures. In this paper, the remaining fatigue life of the support structure for a GE Haliade 6 MW fixed-bottom jacket offshore wind turbine within the Block Island Wind Farm (BIWF) is assessed. The fatigue damage to the tower and the jacket support structure using stress time histories at instrumented and non-instrumented locations are processed. Two validated finite-element models are utilized for assessing the stress cycles. The modal expansion method and a simplified approach using static calculations of the responses are employed to estimate the stress at the non-instrumented locations—known as virtual sensors. It is found that the hotspots at the base of the tower have longer service lives than the jacket. The fatigue damage to the jacket leg joints is less than 20% and 40% of its fatigue capacity during the 25-year design lifetime of the BIWF OWT, using the modal expansion method and the simplified static approach, respectively.