In this study, we have successfully constructed Ag3PO4/Ag/g-C3N4 heterojunctions via the hydrothermal method, which displays a wide photo-absorption range. The higher photocurrent intensity of Ag3PO4/Ag/g-C3N4 indicates that the separation efficiency of the photogenerated electron–hole pairs is higher than that of both Ag3PO4 and Ag/g-C3N4 pure substances. It is confirmed that the efficient separation of photogenerated electron–hole pairs is attributed to the heterojunction of the material. Under visible light irradiation, Ag3PO4/Ag/g-C3N4-1.6 can remove MO (~90%) at a higher rate than Ag3PO4 or Ag/g-C3N4. Its degradation rate is 0.04126 min−1, which is 4.23 and 6.53 times that of Ag/g-C3N4 and Ag3PO4, respectively. After five cycles of testing, the Ag3PO4/Ag/g-C3N4 photocatalyst still maintained high photocatalytic activity. The excellent photocatalysis of Ag3PO4/Ag/g-C3N4-1.6 under ultraviolet-visible light is due to the efficient separation of photogenerated carriers brought about by the construction of the Ag3PO4/Ag/g-C3N4 heterostructure. Additionally, Ag3PO4/Ag/g-C3N4 specimens can be easily recycled with high stability. The effects of hydroxyl and superoxide radicals on the degradation process of organic compounds were studied using electron paramagnetic resonance spectroscopy and radical quenching experiments. Therefore, the Ag3PO4/Ag/g-C3N4 composite can be used as an efficient and recyclable UV-vis spectrum-driven photocatalyst for the purification of organic pollutants.
Ag3PO4/g-C3N4 photocatalytic composites were synthesized via calcination and hydrothermal synthesis for the degradation of rhodamine B (RhB) in wastewater, and characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and diffuse reflectance spectroscopy (DRS). The degradation of RhB by Ag3PO4/g-C3N4 composites was investigated to evaluate their photocatalytic performance and cyclic degradation stability. The experimental results showed that the composites demonstrated notable photocatalytic activity and stability during degradation. Their high degradation efficiency is attributed to the Z-scheme transfer mechanism, in which the electrons in the Ag3PO4 conduction band and the holes in the g-C3N4 valence band are annihilated by heterojunction recombination, which greatly limits the recombination of photogenerated electrons and holes in the catalyst and enhances the activity of the composite photocatalyst. In addition, measurements of photocurrent (PC) and electrochemical impedance spectroscopy (EIS) confirmed that the efficient charge separation of photo-generated charges stemmed from strong interactions at the close contact interface. Finally, the mechanism for catalytic enhancement in the composite photocatalysts was proposed based on hole and radical trapping experiments, electron paramagnetic resonance (EPR) analysis, and work function evaluation.
The Ag3PO4/CoFe1.95Y0.05O4 nanocomposite with magnetic properties was simply synthesized by the hydrothermal method. The structure and morphology of the prepared material were characterized, and its photocatalytic activity for degradation of the methylene blue and rhodamine B dyes was also tested. It was revealed that the Ag3PO4 in the nanocomposite exhibited a smaller size and higher efficiency in degrading dyes than the individually synthesized Ag3PO4 when exposed to light. Furthermore, the magnetic properties of CoFe1.95Y0.05O4 enabled the nanocomposite to possess magnetic separation capabilities. The stable crystal structure and effective degradation ability of the nanocomposite were demonstrated through cyclic degradation experiments. It was shown that Ag3PO4/CoFe1.95Y0.05O4–0.2 could deliver the highest activity and stability in degrading the dyes, and 98% of the dyes could be reduced within 30 min. Additionally, the photocatalytic enhancement mechanism and cyclic degradation stability of the magnetic nanocomposites were also proposed.
Recently, we revealed the electronic nature of the tubular Au26 based on spherical aromaticity. The peculiar structure of the Au26 could be an ideal catalyst model for studying the adsorptions of the Au nanotubes. However, through Google Scholar, we found that no one has reported connections between the structure and reactivity properties of Au26. Here, three kinds of molecules are selected to study the fundamental adsorption behaviors that occur on the surface of Au26. When one CO molecule is adsorbed on the Au26, the σ-hole adsorption structure is quickly identified as belonging to a ground state energy, and it still maintains integrity at a temperature of 500 K, where σ donations and π-back donations take place; however, two CO molecules make the structure of Au26 appear with distortions or collapse. When one H2 is adsorbed on the Au26, the H–H bond length is slightly elongated due to charge transfers to the anti-bonding σ* orbital of H2. The Au26-H2 can maintain integrity within 100 fs at 300 K and the H2 molecule starts moving away from the Au26 after 200 fs. Moreover, the Au26 can act as a Lewis base to stabilize the electron-deficient BH3 molecule, and frontier molecular orbitals overlap between the Au26 and BH3.