In the paper, using the video image correlation method, a study of the micro-movement pattern of the dental implant and of a normal was performed. It is revealed that there are great differences between these two situations. The linear displacement type of the dental implant refers to the linear elastic modulus of bone tissue in the case of normal bite forces. It seems that the major influencing factor regarding the type and value of implant micro-movement is defined by the underlying bone tissue. It is to be considered that masticator force transmission inside a more stiff and dense bone could be attenuated by the antagonist teeth parodontium, dental implant and abutment connection type, and the elastic modulus of material of the dental crown. Because of the elasticity of the periodontal ligament system, during the loading of the dental implant, the natural tooth has been displaced slightly more, leaving the dental implant in an unfavorable position, having to bear the full amount of loading forces. When comparing the relative displacements in the case of the loaded tooth, it is shown that the dental implant has been moving almost symmetrically with the tooth. This could mean that large amounts of forces are transmitted towards the periimplant bone tissue, but in a more optimal, parabolic manner due to the action of the periodontal ligaments surrounding the natural tooth.

The mechanical properties of the dental filling material (DFMs) strongly influence the lifetime and durability of the tooth reparation performed. Among the most significant mechanical characteristics, one has to mention the Poisson’s ratio and the elastic modulus (Young’s modulus). They, during the cyclic mastication load, can prevent or aid in the prevention of secondary dental decays by provoking micro-cracks, the de-bonding of the filling material from the natural dental tissue, as well as fatigue at the level of their interface. The authors performed a scoping analysis of the nowadays-involved experimental methods, together with a critical review, putting in evidence of their advantages and limits. Based on the developments, they propose a new approach in this sense by involving the electronic speckle pattern interferometry (ESPI)/shearography high-accuracy optical method. They illustrate the advantages of this method in establishment of the elastic modulus, but they also propose a high-accuracy methodology in the estimation of Poisson’s ratio. Based on the briefly-illustrated experimental results, one can conclude that ESPI/shearography can become a very useful tool for research, even though it is not a common (nowadays widely applied) method, such as three-point bending or strain gauge methods.

Background: Inserting dental implants in severely atrophied jawbones is a great challenge for the dental practitioner. There are an increasing number of patients who choose dental implantanchored prosthetic restorations despite compromised bone quality and quantity. There have been numerous attempts in adapting implant design for the atrophic crestal bone. One-piece, needle-type basal implant design is a typical design for these cases. These implants are inserted in the remaining compact bone located in the basal aspect of the jawbones. If high primary stability is achieved, these implants are used for immediate loading protocol. From many points of view, this technique is based on contradictory principles compared to classic implant surgery and loading protocols. The aim of this study was to investigate the long-term success of basal one-piece short-diameter dental implants used for immediate loading protocol. Materials and methods: A total of 56 dental implants were included in this study. Peri-implant bone loss was measured on orthopantomographs. Bone resorption was measured in millimeters in the first 6 and 12 months of functional loading. Results: There were no failing implants in this period; average bone resorption was 1.59 mm after 6 months of functional loading and 2.05 mm after 12 months. Bone resorption was slightly higher in the mandible than in the maxilla. Conclusions: Immediate implant loading protocol might be an attractive solution for fixed fullarch restoration using short-diameter one-stage basal implants, but long-term effects require further investigations.

Cervical necrotizing fasciitis is a very rare complication of a bacterial infection that can have a dental cause. This type of infection typically affects fascial plane, which has a poor blood supply and can affect soft tissue and cervical fascia and can spread quickly causing infection of mediastinum. Initially, in the first stage, the overlying tissues are unaffected, and this can delay diagnosis and surgical intervention. Incidence in children is extremely rare and can be frequently associated with various other general pathologies that decrease the immune system response. We present a case of a young 12-year-old boy diagnosed with this type of infection in the head and neck as a complication of a second inferior molar pericoronitis. The treatment and the management of the case was difficult not only due to the presence of the infection but also because of the prolonged intubation.

Background/Objectives: To make a dental office more environmentally conscious, it is essential to use eco-friendly disinfectants without compromising patient safety. Our aim was to examine and compare the effectiveness of the commonly used conventional disinfectants in Romania with the effectiveness of available eco-friendly disinfectants. Methods: Two traditional (Gigasept, Zeta 1 Ultra), and two eco-friendly (IDactiv, Sekusept Aktiv) disinfectants and an eco-friendly (gigazyme) cleaning agent were compared. For a thorough evaluation, minimal inhibitory and bactericidal concentration (MIC/MBC) tests were conducted, along with a Bradford assay to measure the concentration of residual proteins on instruments contaminated by controlled contamination and dental office use after disinfection. Results: During the MIC test, with the exception of Gigazyme^®, which is an enzymatic cleaner, all of the tested disinfectants were effective in the case of the bacterial reference strains used at the concentration prescribed by the manufacturers. After disinfection, the amount of protein remaining on the dental instruments did not exceed the maximum concentration according to the ISO 15883-5:2005 protocol, and the protein removal efficiency was between 96.04% and 99.03% for all disinfectants. In the MIC/MBC test, the peracetic acid-based Sekusept Aktiv was the most effective, while Gigazyme^® and BossKlein IDactiv^® showed the highest protein removal efficiency. Conclusions: The tested eco-friendly disinfectants meet the necessary performance criteria and thus offer a sustainable alternative to traditional disinfectants.

Background: Dental implants are useful tools and represent a widely spread technique for oral rehabilitation. Their long standingness is highly influenced by the mechanical and geometrical properties of the surrounding osseous tissue in which they are placed. In some unsuccessful cases though, the dental implant is exposed to masticatory forces and other functional acts, and osseous tissue may resorb near its vicinity, leading to the dental implants loss. We investigated the strain distribution inside the fixating substrate, given certain stages of its deterioration near the dental implants