3D printing technology can produce complex objects directly from computer aided digital designs. The technology has traditionally been used by large companies to produce fit and form concept prototypes (‘rapid prototyping’) before production. In recent years however there has been a move to adopt the technology as full-scale manufacturing solution. The advent of low-cost, desktop 3D printers such as the RepRap and Fab@Home has meant a wider user base are now able to have access to desktop manufacturing platforms enabling them to produce highly customised products for personal use and sale. This uptake in usage has been coupled with a demand for printing technology and materials able to print functional elements such as electronic sensors. Here we present formulation of a simple conductive thermoplastic composite we term ‘carbomorph’ and demonstrate how it can be used in an unmodified low-cost 3D printer to print electronic sensors able to sense mechanical flexing and capacitance changes. We show how this capability can be used to produce custom sensing devices and user interface devices along with printed objects with embedded sensing capability. This advance in low-cost 3D printing with offer a new paradigm in the 3D printing field with printed sensors and electronics embedded inside 3D printed objects in a single build process without requiring complex or expensive materials incorporating additives such as carbon nanotubes.

A low‐cost micro‐stereolithography technique with the ability to additively manufacture dense piezoelectric ceramic components is reported. This technique enables the layer‐wise production of functional devices with a theoretical in‐plane resolution of ∼20 μm and an out‐of‐plane resolution of <1 μm without suffering a significant reduction in the piezoelectric properties when compared to conventionally produced ceramics of the same composition. The ability to fabricate devices in complex geometries and with different material properties means that conventional limits of manufacturing are not present. A hollow, spherical shell of the piezoelectric material 0.65Pb(Mg_⅓Nb_⅔)O₃–0.35PbTiO₃, built without tooling or recourse to additional equipment or processes, is shown generating ultrasound in the MHz range.

The selection of printing parameters for 3D printing can dramatically affect the dynamic performance of components such as polymer spur gears. In this paper, the performance of 3D printed gears has been optimised using a machine learning process. A genetic algorithm (GA)–based artificial neural network (ANN) multi-parameter regression model was created. There were four print parameters considered in 3D printing process, i.e. printing temperature, printing speed, printing bed temperature and infill percentage. The parameter setting was generated by the Sobol sequence. Moreover, sensitivity analysis was carried out in this paper, and leave-one cross validation was applied to the genetic algorithm-based ANN which showed a relatively accurate performance in predictions and performance optimisation of 3D printed gears. Wear performance of 3D printed gears increased by 3 times after optimised parameter setting was applied during their manufacture.