Reflectarrays (RAs) exhibit important advantages over conventional antenna arrays, especially in terms of realizing pencil-beam patterns without the employment of the feeding networks. Unfortunately, microstrip RA implementations feature narrow bandwidths, and are severely affected by losses. A considerably improved performance can be achieved for RAs involving grounded dielectric layers, which are also easy to manufacture using 3D printing technology. Regardless of the implementation details, a practical bottleneck of RA design is the necessity of independent adjustment of a large number of unit cells, which has to be carried out using full-wave electromagnetic (EM) simulation models to ensure reliability. The associated computational costs are extraordinary. A practical workaround is the incorporation of surrogate modeling methods; however, a construction of accurate metamodel requires a large number of training data samples. This letter introduces an alternative RA design approach, where the unit cells are adjusted using an inverse surrogate model established with a small number of anchor points, pre-optimized for the reference reflection phases. To ensure solution uniqueness, the anchor point optimization involves regularization, here, based on the minimum-volume condition for the unit cell. The presented approach reduces the computational cost of RA design to a few dozens of EM analyses of the cell. Several demonstration examples are provided, along with an experimental validation of the selected RA realization.
16 February 2016 in International Journal of RF and Microwave Computer-Aided Engineering
In this paper, designs of both circular and octagonal microstrip patch antennas are presented on the Substrate Integrated Waveguide (SIW) for X- Band Applications. Both antennas are modelled and simulated using the full -wave simulator CST MWS. It can be concluded that the proposed antenna designs are able to achieve high gain and directivity with the miniature, compact, light, cost effective and easy to fabricate structures.
Radial Line Slot Array (RLSA) antennas have appealing features including high gain and high efficiency combined with a low profile. Especially by highlighting their structural simplicity, RLSA antennas can be good competitors to reflector antennas if the efficiency parameters are improved. In this article, a novel approach is presented to improve the aperture efficiency of RLSAs, with a significant increase of around 10% being achieved. The core principle of this method is the use of non-uniform slot density on the RLSA antenna rings, in addition to non-uniform slot length. RLSA antennas consist of many spiral rings and slots are placed on these rings. With the help of new the concept, slot density has been increased especially on the outer spiral lines, and thus significant improvement has been achieved in both aperture efficiency and return loss. In order to verify the concept, a prototype antenna was fabricated at 26 GHz. The measured results of the prototype antenna show an excellent aperture efficiency of 45%, peak gain of 30.3 dB, and axial ratio of less than 3 dB at operating the frequency band. Also, the antenna reflection coefficient value is less than -10 dB between 24.75 GHz and 27.5 GHz and side lobe levels are below 18 dB, which indicate good pattern characteristic.
Todays, Ground Penetrating Radar (GPR) System is used for civil applications such as detection of buried pipes, mine and military fields. One of the recent applications of GPR in civil and defense industry is detection of human vital signs through obstacles such as wall, rubble etc. In this study, we aim to set ultra-wideband ground penetrating radar system for detection human vital signs. For this purpose, system parameters will be designed and data acquisition will be performed successfully. For signal extraction of respiratory motion, Fast Fourier Transform will be applied on radar data.