The near fault (NF) line waves send out signal envelopes that oscillate over lengthy periods of time with periodic impulses. Like train bridges, train tracks demonstrate comparable track-bridge (TB) motion dynamics. Using these coupling dynamics, are the high-speed train-track-bridge (HSTTB) system designs sensitive to those parameters? This research incorporates a Finite Element Analysis (FEA) technique developed for simulating the dynamic reactions of the coupled TB system when faced with simultaneous NF lateral and vertical ground motions (GMs). For the first time, data from the pre-commissioning field testing of the Beijing-Shanghai high-speed train are utilized to validate the Train-Track-Bridge Dynamic Analysis (TTBDA) test. As a matter of fact, the current research has concentrated on the running safety of the high-speed train's operations, as well as the possible derailment mechanism of the high-speed train, in light of the far-field (FF) earthquakes. This analysis reveals that the NF GMs in the bridge structure's seismic reactivity are considerable. Many high-speed train derailments are due to frequent wheel displacement, elevated wheels, and significant lateral motion. The data discovered in the field may give engineers vital information for calculating relevant situations and railroad engineering projects.
One‐dimensional (1D) site response analysis (SRA), which considers vertically propagating seismic waves from the bedrock to the surface, has been a common technique among geotechnical engineers to examine site‐specific ground shaking. However, observations from past earthquakes and analytical studies indicate that idealizations ingrained in 1D SRA may be too severe to capture the ground truth, such as the omissions of spatial variability of soil properties, surface topography, and basin and directivity effects. Physics‐based three‐dimensional ground motion simulations (GMSs) can incorporate these factors and yield more reliable predictions. In this study, we utilize ground motions from 57 physics‐based broadband (from 0 to 8–12 Hz) GMS for a region of Istanbul. A total of 2912 sites with experimentally measured soil profiles that are distributed over the 30 km‐by‐12.5 km area are also modeled as soil columns and analyzed through 1D SRA. The ground responses from 1D SRA and three‐dimensional (3D) GMS are then compared for all 57 earthquake scenarios. These systematic comparisons are then used for examining model features that are correlated with variations in the ratios of various ground motion intensity measures (IMs) and for developing regression‐based formulas that can be used for determining simple factors for the considered region to correctly scale (up or down) the site‐specific ground motion intensities obtained from 1D SRA, including peak ground acceleration (PGA), peak ground velocity (PGV), and spectral acceleration (
S
a ) values.
Vibration analysis of bridges induced by train loads is a crucial aspect of railway design, particularly considering the complexity of vehicle components such as bogie-suspension systems. Consequently, railway engineers have endeavored to improve the computational efficiency and applicability of train models using the finite-element method. This paper introduces a toolbox implemented in ABAQUS through a user-defined element (UEL) subroutine, which incorporates the vehicle–bridge interaction (VBI) element theory. This toolbox effectively handles diverse vehicle–bridge interaction systems. In the proposed theory, the wheel-track contact force is derived based on the bridge response, eliminating the need for an iterative process and significantly reducing computational workload compared to classical physics-based analysis. The presented approach is validated through a moving sprung mass model and a moving rigid bar model. Furthermore, a case study is conducted on a three-dimensional finite-element model of a high-speed railway bridge in China, based on a design sketch, to showcase the capabilities of the developed scheme. The study demonstrates the practical application of the proposed methodology in analyzing vehicle–bridge structures with high complexity.
17 October 2024 in Soil Dynamics and Earthquake Engineering