The continued development of electro-hydrostatic actuators (EHAs) in aerospace applications has put forward an increasing demand upon EHA pumps for their high power density. Besides raising the delivery pressure, increasing the rotational speed is another effective way to achieve high power density of the pump, especially when the delivery pressure is limited by the strength of materials. However, high-speed operating conditions can lead to several challenges to the pump design. This paper reviews the current challenges including the cavitation, flow and pressure ripples, tilting motion of rotating group and heat problem, associated with a high-speed rotation. In addition, potential solutions to the challenges are summarized, and their advantages and limitations are analyzed in detail. Finally, future research trends in EHA pumps are suggested. It is hoped that this review can provide a full understanding of the speed limitations for EHA pumps and offer possible solutions to overcome them.
Axial piston pump is the key component of a hydraulic system. The reliability of the axial piston pump influences the reliability of the fluid power system directly. Discharge pressure signals are easy to obtain and can reflect the dynamic performance of the axial piston pump. Although many studies have been developed for fault diagnosis of the axial piston pump, most of these methods are based on supervised artificial intelligence-based methods that rely on massive labeled data. However, in practice application, the external load of the hydraulic system often varies and it is quite impractical or expensive to obtain massive labeled data. This article proposes a novel Subsequence Time Series(STS) clustering based unsupervised approach for anomaly detection of the axial piston pump using discharge pressure signal. The proposed approach comprises two stages, norm cluster search, and anomaly subsequence clustering. The proposed approach performs multiple STS clustering to search the norm cluster whose center can encode the time series better. The proposed approach comprises of four modules: motif discovery, parameter-free minimum description length(MDL) clustering, subsequence search, and scoring the norm cluster. Subsequence search via dynamic time warping(DTW) enables the approach to discover the subsequences of variable length. In particular, weak fault signal detection is achieved by evaluating the local distribution of subsequence. The effectiveness of the proposed approach is validated through experiments under different external loads.
11 December 2021 in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
The axial piston pump in aerospace applications needs to operate over a wide range of fluid temperatures from −54°C to 135 °C. The fluid properties at such extreme temperatures will significantly affect the cavitation that is one of the major limiting factors for the efficiency and reliability of aviation axial piston pumps. However, it appears that very little of the existing literature studies the effects of extreme fluid temperatures on the pump cavitation. This paper aims to examine the temperature effects on the cavitation in an aviation axial piston pump. First, we develop a three-dimensional (3D) transient computational fluid dynamics (CFD) model to investigate the pump cavitation and validate it experimentally. Second, we use the validated CFD model to investigate the temperature effects on the pump cavitation by changing the fluid properties including viscosity, density, and bulk modulus. The numerical results show that low fluid temperature makes the aviation axial piston pump suffer serious cavitation due to high viscosity, leading to delivery flow breakdown, unacceptable pressure pulsation, and delayed pressure built up. In contrast, high fluid temperatures have minor effects on the cavitation although they increase the pressure pulsation and built-up time slightly.