We report the synthesis of manganese-doped nickel cobalt oxide (Mn-doped NiCo2O4) nanoparticles (NPs) by an efficient hydrothermal and subsequent calcination route.
A critical bottleneck in the development of aqueous electrochemical energy storage systems is the lack of viable complete cell designs. We report a metal-free, bipolar pouch cell designed with carbon black/polyethylene composite film (CBPE) current collectors as a practical cell architecture. The light-weight, corrosion-resistant CBPE provides stable operation in a variety of aqueous electrolytes over a ∼2.5 V potential range. Because CBPE is heat-sealable, it serves simultaneously as both the pouch cell packaging and seal in addition to its use as a current collector. Although this non-metallic composite has a low electrical conductivity relative to metal foils, current travels only a short distance in the through-plane direction of the current collector in the bipolar cell configuration. This shorter path length lowers the effective electrical resistance, making the design suitable for high-power applications. We test the cell architecture using an aqueous ZnBr2 battery chemistry and incorporate tetrabutylammonium cations to improve the intrinsic low Coulombic efficiency and fast self-discharge of non-flow ZnBr2 cells. These devices demonstrate a cell-level energy density of 50 W h L−1 at a 10C rate (0.5 kW L−1), with less than 1% capacity loss over 500 cycles. A large-area (>6 cm2) 4-cell stack is built to illustrate that the pouch cells are scalable to practical dimensions and stackable without sacrificing performance. The device operates in the range of 6–7 V and has an internal self-balancing mechanism that prevents any individual cell in the stack from overcharging. The results thus demonstrate both a conceptually new cell architecture that is broadly applicable to many aqueous electrolyte chemistries and a specific high-performance example thereof.
1 October 2017 in Microporous and Mesoporous Materials
Solid-state polymer electrolytes (SPEs) possess several favorable properties, such as high flexibility, easy processability, and better safety for batteries. Thus, SPEs are attracting considerable attention for the development of safer Li ion batteries. However, SPEs typically lack the required ionic conductivity for improved Li+ transportation. Therefore, suitable fillers are often used to prepare composite polymer electrolytes (CPEs) with improved ionic conductivity. In this direction, a novel CPE with increased electrochemical stability and durability was prepared by incorporating highly porous Zr-based metal–organic frameworks (MOFs), herein referred to as ZR8, as fillers in poly(ethylene oxide) (PEO)/Li salt systems. PEO in the prepared CPE showed low crystallization ratios, and the CPE showed enhanced Li+ ion transportation, thereby improving mechanical and fire-retardant properties. It was also able to hinder Li dendrite formation and eventually facilitated efficient transport of Li+ ions through the electrolyte. A high specific surface area, the presence of Lewis acid–base sites, and good thermal and chemical stability of the ZR8 filler contributed to the improved electrolyte performance. CPE prepared with 7.5% ZR8 fillers showed a good ionic conductivity of 2.53 × 10−4 S cm−1 at 30 °C and 1.35 × 10−3 S cm−1 at 60 °C and an electrochemical window of ∼5.58 V. The [Li|ZR8-7.5|Li] cell showed an excellent stability in 8000-h operation without any flaw (at 60 °C and a current density of 100 μA cm−2). Additionally, the [Li|ZR8-7.5|LFP] cell was able to retain over 80% of its initial capacity (144.9 mA h g−1 at 0.5C) even after 800 cycles.