Polydimethylsiloxane (PDMS) foam materials with lightweight, excellent oil resistance and mechanical flexibility are highly needed for various practical applications in aerospace, transportation, and oil/water separation. However, traditional PDMS foam materials usually present poor chemical resistance and easily swell in various solvents, which greatly limits their potential application. Herein, novel fluorosilicone rubber foam (FSiRF) materials with different contents of trifluoropropyl lateral groups were designed and fabricated by a green (no solvents used) and rapid ( 120°), reliable mechanical flexibility (complete recovery ability after stretching of 130% strain or compressing of >60%), and improved chemical resistance and structural stability in various solvents, making them promising candidates for efficient and continuous oil–water separation. This work provides an innovative concept to design and prepare advanced fluorosilicone rubber foam materials with excellent chemical resistance for potential oil–water separation application.
8 May 2023 in Colloids and Surfaces A: Physicochemical and Engineering Aspects
With the demand for carbon dioxide emission reduction, the sustainable conversion of useless biomass into high-value energy storage devices has received excellent scientific and technological attention. The high synthesis cost and low specific capacitance limited the supercapacitor application. Therefore, biomass-derived sulfur-doping porous carbon (SPC) has been synthesized from ulothrix using simple pyrolysis and chemical activation methods. The unique activated carbon material exhibits a high specific surface area (2490 m2 g–1), and the effect of the activator addition ratio was systematically investigated. The optimized SPC-2 displayed a high specific capacitance (324 F g–1 at 1 A g–1) and excellent cycling stability (90.6% retention after 50 000 cycles). Furthermore, a symmetric supercapacitor (SSC) based on SPC-2 demonstrated a high energy density (12.9 Wh kg–1) at an 800 W kg–1 power density. This work offers a simple, economical, and ecofriendly synthetic strategy of converting widespread, useless biomass waste into high-performance supercapacitor applications.
Surface-enhanced Raman spectroscopy (SERS) is a precise and noninvasive analytical technique to identify vibrational fingerprints of trace analytes with sensitivity down to the single-molecule level. However, substrates can influence this capability, and current SERS techniques lack uniform, reproducible, and stable substrates to control plasma hot spots over a wide spectral range. Herein, we demonstrate a flexible SERS substrate via longitudinal stretching of a polydimethylsiloxane (PDMS) film. This substrate, after stretching and shrinking, exhibits an irregular wrinkled structure with abundant gaps and grooves that function as hot spots, thereby improving the hydrophobic properties of the material. To investigate the enhancement effect of Raman signals, silver nanoparticles (AgNPs) were mixed with Rhodamine 6G (R6G) solution, and the obtained blend was dropped onto the PDMS film to form a coffee ring pattern. According to the results, the hydrophobicity of the substrate increases with the degree of PDMS stretching, achieving the optimal level at 150% stretching. Moreover, the increase in hydrophobicity makes the measured molecules more aggregated, which enhances the Raman signal. The stretching and shrinkage of the PDMS film lead to a much higher density of nanogaps among nanoparticles and nanogrooves, which serve as multiple hot spots. Being highly localized regions of intense local fields, these hot spots make a significant contribution to SERS performance, improving the sensitivity and reproducibility of the method. In particular, the relative standard deviation (RSD) was found to be 2.5544%, and the detection limit was 1 × 10–7 M. Therefore, SERS using stretchable and flexible micro–nano substrates is a promising way for detecting dyes in wastewater.
Azobenzene derivatives have fast light response characteristics; in this paper, a new azobenzene derivative (Azo) was synthesized and to be made a composite (PANI/GO/Azo) with polyaniline/graphene oxide (PANI/GO). Both composites were carefully investigated by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and thermogravimetric analysis (TGA). Moreover, their electrochemical properties were characterized by the electrochemical workstation, including cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), cycling stability, and electrochemical impedance spectroscopy (EIS). The results demonstrated that the PANI/GO/Azo composite has a higher capacitance of 478.3 F g−1 than that of PANI/GO (359.9 F g−1) at a current density of 1 A g−1. PANI/GO/Azo composite showed excellent photosensitive electrochemical properties under UV irradiation, and its rate of capacitance change achieved about 52.57%. Additionally, the PANI/GO/Azo composite also displayed high reversibility, with specific capacitance retention of 92% after 500 cycles. Therefore, the PANI/GO/Azo electrode with a controllable electrochemical performance by UV irradiation had a great potential in the photoresponsive supercapacitor.