The mechanism of double-pulse laser irradiation under spatial confinement remains unclear due to complex plasma plume dynamics and multiple shock wave interactions. In this study, coupling of spatial confinement and double-pulse irradiation was investigated using fast photography, laser shadowgraphy, and spectroscopy. The experimental results demonstrated unique dynamic processes of plasma plume and shock waves, confirming that the plasma plume was eventually reshaped into a jet-like structure, and the combined enhancement effect can be regulated through different parameters, including inter-pulse delay and plate spacing. The inter-pulse delay dictates the primary mechanism of the secondary pulse's interaction with the initial plasma and the target surface; as it increases, plasma front absorption decreases while target surface ablation intensifies. Plate spacing determines the delay from laser incidence to plasma plume compression; along with the inter-pulse delay, it influences whether the secondary pulse generates a second-generation shock wave that merges with the initial shock wave for compression or performs a secondary compression after the first. Compared to double-pulse irradiation alone, combined enhancement increased emission intensity of Fe, Ni, and C spectra by up to 4.1 times accompanied by the increase in plasma temperature. The R2 of calibration curves was increased, and the sensitivity for trace components Cr and C was improved with limits of detection reaching 255 and 659 ppm.
We investigate the effects of specular reflection on the laser-induced breakdown (LIB) of copper, iron, and tungsten using fast photography and optical emission spectroscopy. The laser parameters include spot diameter ranging from 30.89 to 1589.33 μm, irradiance from 467.10 to 0.17 GW/cm2, with a single pulse of 6 ns duration and 21 mJ energy. As the laser spot defocuses, the plasma morphology changes from a single plasma near the target surface to a separated, independently evolving two-component plasma, and then to a single plasma suspended above. The defocusing distance for this transition is significantly influenced by specular reflectance. The separate plasma, comprising of a metallic component and an air component, occurs only under high specular reflectance conditions: ≥66.7% for copper, ≥51.4% for iron, and ≥44.9% for tungsten. The spectral emission of the metallic component initially increases and then decreases with reducing specular reflectance, due to a trade-off between enhanced surface absorption and reduced irradiance caused by surface roughening. LIB threshold irradiance increases with specular reflectance, rising from 0.31 to 1.22 GW/cm2 for copper, 0.24 to 0.70 GW/cm2 for iron, and 0.38 to 0.87 GW/cm2 for tungsten. These findings show the impact of sample pretreatment on LIB ignition and subsequent plasma evolution, offering insights into potential sources of inaccuracy in LIB applications.
We investigate the physical mechanisms of the interaction between terahertz waves and antioxidant 1010 in polyethylene (PE) using terahertz time-domain spectroscopy (THz-TDS). The THz waves are generated by an InGaAs photoconductive emitter antenna and detected by an InGaAs photoconductive receiver antenna, which are both driven by a pulsed laser with a wavelength of 1560 nm, pulse repetition rate of 80 MHz, and pulse duration of 100 fs. With increasing concentrations of antioxidants, the absorption spectrum exhibits a marked increase in the intensity of the absorption peaks at 0.91, 1.20, 1.52, and 1.71 THz and a corresponding reduction in their broadening. The absorption spectrum calculated from the density functional theory-based numerical model developed in this work aligns with the experimental data, confirming the fact that THz absorption strengthens the van der Waals interactions between molecular groups, with methyl groups exhibiting stronger interactions than oxygen-containing groups, which drives collective multiatomic vibrations. The frequency-resolved calibration curve for the antioxidant concentration is optimal at 0.77 THz (coefficient of determination R2 = 0.99476, root-mean-square error of cross-validation RMSECV = 2.67 wt.%) rather than at the absorption peak frequencies, stemming from the combined effects broadband absorption peaks. These findings provide the THz spectral response of antioxidant molecules in PE both theoretically and experimentally, and they demonstrate the potential of THz-TDS as a rapid, accurate, and non-destructive method for quantifying antioxidant concentration in polymer cables for power systems.
24 February 2025 in IEEE Transactions on Instrumentation and Measurement
Ethylene-Vinyl-Acetate-Copolymers (EVA) are widely used in the manufacture of wires and cables as electrical insulating media in electric power fields. Oxidation is one of the primary mechanisms leading to the aging of polymer materials, and the addition of antioxidants can effectively slow the oxidation reaction. Current non-destructive testing methodologies face challenges in the measurement of antioxidant concentrations, which constitute a critical metric for aging assessments. In this paper, we propose a method for measuring antioxidant concentration using terahertz time-domain spectroscopy (THz-TDS). In comparison to other techniques such as liquid chromatography, no elaborate sample preparation is necessary, and calibration measurements can be conducted rapidly. The spectral changes caused by the addition of different concentrations of antioxidants were investigated, and the results showed that the refractive index and dielectric constant increased significantly with a decrease in the antioxidant concentration. When the concentration of antioxidant 1010 in the sample was increased from 0 to 10%, the refractive index decreased from 1.55 to 1.42, and the dielectric constant decreased from 2.38 to 2.03 average over the band of 0.5-2.5 THz. Moreover, the numerical calculation using density functional theory (DFT) showed the introduction of oxygen-containing functional groups of antioxidant 1010 molecules into EVA molecules slightly reduced the polarization, resulting in a consistently decrease in the dielectric constant of the constructed materials compared with original EVA materials. The classification of antioxidant concentration in EVA was predicted using machine learning, including Partial Least Squares Regression (PLSR), Random Forest (RF), Support Vector Regression (SVR), and extreme Gradient Boosting (XGboost). XGboost was found to have the highest prediction accuracy with an root mean square error (RMSE) of 0.0412. In order to ascertain the characteristic spectrum of the 1010 antioxidant, we selected the dielectric constant at the 0.9 THz position for a linear fit. The root mean square error of cross validation (RMSECV) value for leave-one-out cross validation (LOOCV) was found to be 0.38.
15 May 2026 in Journal of Physics D: Applied Physics
Photoconductive thyristors (PCTs) are attractive solid-state switches for high-power pulsed systems. However, the incomplete conduction always exists in applications. This paper analyzes the carrier transport and current channel evolution in PCTs incomplete conduction using experiments and TCAD simulations. Under a 6 kV bias, the measured current rise rate (d i /d t ) decreases from 82.07 kA µ s −1 (complete conduction) to 28.91 kA µ s −1 (incomplete conduction), accompanied by a typical voltage-step phenomena. The simulations corroborate the measured voltage waveform and indicate that, when trigger light energy is insufficient, the peak electric field migrates inward while contracting laterally. This electric field contraction suppresses lateral current spreading, promotes current filamentation, and leads to strong local thermal accumulation that leading to device damage. Parametric simulations further show that reducing loop inductance and using higher-energy, shorter-rise-time laser triggering can suppress the voltage step. This study may offer valuable insights for the structural optimization, experimental analysis, and circuit optimization of PCTs.
14 May 2026 in IEEE Transactions on Instrumentation and Measurement
Stress concentration under complex loading frequently leads to early microstructural damage. Conventional nondestructive testing (NDT) methods suffer from low spatial resolution, limiting their effectiveness for the assessment of micro-scale residual stresses. To address these issues, this study proposes a high-spatial-resolution Magnetic Barkhausen Noise (MBN) detection approach incorporating a novel magnetic head sensor. In parallel, laser shock peening (LSP) is employed to create controllable micro-scale stress concentration zones. The novel sensor integrates a claw-shaped yoke and a micrometer-scale working gap, achieving a spatial resolution in the range of 0.6–0.8 mm -- significantly superior to that of traditional ferrite-core coil sensors. Comparative tests demonstrate that the magnetic head sensor can offer higher signal sensitivity (peak-to-valley ratio: 2.4 vs. 1.3 for the traditional coil) and lower noise error (0.13 mV vs. 0.72 mV) under identical conditions. In addition, a multi-angle magnetization scanning strategy combined with the maximum principal stress (σ₁) synthesis method is developed for stress field reconstruction, effectively reducing the relative standard deviation (RSD) from 18% to 4% compared to single-angle scanning, and enabling accurate reconstruction in both square (3×3 mm) and triangular (3 mm edge length) regions.