As the most advanced vegetable cultivation technology adopted all over the world, tray seedling is the key link of vegetables to increase crop yield and economic benefit. As the key to the whole production process, the precision of tray seedlings is directly related to the survival rate of seeds. Combining the small scale of the domestic vegetable tray seedling industry, low level of mechanization, and low profit of sowing equipment, a tray seedling precision seeder is proposed in this paper and ADAMS software is used to carry out dynamic analysis on the main stressed parts. The results showed possible problems in the design of this type of mechanism, and possible causes were analyzed, the structure of the precision planter was optimized based on the results, and the motion performance of the seeder was improved, which is of great significance for the realization of precision seeding in an automated assembly line.
Sowing accuracy is a critical factor in evaluating the precision of sowing equipment, and the sowing rate of the sowing equipment developed at home and abroad cannot reach 100 %, so this paper designs a seed reseeding device, aiming to improve the sowing rate secondly. Firstly, the structural composition of the seed reseeding device is introduced; secondly, according to the production object selected in this paper, kale seed (Jingfeng No.1), the best combination of factors and levels of the suction nozzle is 8 m/s inlet speed, 1.8 mm aperture, 18 mm lead and V-shaped nozzle by using orthogonal experiment; then, the EDEM software was used to conduct the vibration test, and it was found that the seed group “boils” steadily at about 15.13 mm (the depth of the reseeding tray is 23 mm), which can effectively improve the suction rate of the suction nozzle; finally, by combining the simulation results of the flow field using Fluent/ANSYS software and the spatial distribution of seeds, the number of seeds in the effective adsorption range of a single suction nozzle is about 4. The determined number of seeds, approximately 4, accounts for only 0.04% of the total number of seeds generated by the simulation. This percentage ensures high suction precision and a single seed rate, particularly under working conditions where a 72-hole tray is being sowed. In general, domestic sowing accuracy ranges from 90% to 95%. With this configuration, the purpose of improving the sowing rate twofold can be achieved.