Lattice structures, characterized by their repetitive, interlocking patterns, provide an efficient balance of strength, flexibility, and reduced weight, making them essential in fields such as aerospace and automotive engineering. These structures use minimal material while effectively distributing stress, providing high resilience, energy absorption, and impact resistance. Composed of unit cells, lattice structures are highly customizable, from simple 2D honeycomb designs to complex 3D TPMS forms, and they adapt well to additive manufacturing, which minimizes material waste and production costs. In compression tests, lattice structures maintain stiffness even when filled with powder, suggesting minimal effect from the filler material. This paper shows the principles of creating finite element simulations with 3D-printed specimens and with usage of the lattice structure. The comparing of simulation and real testing is also shown in this research. The efficiency in material and energy use underscores the ecological and economic benefits of lattice-based designs, positioning them as a sustainable choice across multiple industries. This research analyzes three selected structures—solid material, pure latices structure, and boxed lattice structure with internal powder. The experimental findings reveal that the simulation error is less than 8% compared to the real measurement. This error is caused by the simplified material model, which is considering the isotropic behavior of the used material PA12GB (not the anisotropic model). The used and analyzed production method was multi jet fusion.
This article deals with unconventional materials usage in design of vehicle bodies. Main focus is on sandwich materials (with honeycomb structure) for walls of the main body. These panels are designed from polypropylene. Joining of theses sand...
(1) Background: The purpose of this study was to investigate deformations that occur during additive manufacturing by the HP (Hewlett-Packard) Multi Jet Fusion (MJF) process. These deformations affect the final properties of 3D-printed parts, and proper compensating technology has to be developed in order to minimize these deformations. (2) Methods: Parts were printed with powder composed of nylon plastic infused with glass beads (PA12GB). The HP MJF technology was used during investigations. All parts (specimens) were measured at different points over an extended period to follow the deformations at each point. Different finite element simulations were performed to compare them with real results and assess the viability of using simulations to save time. Various modules of the Digimat software, such as additive manufacturing (AM), material focused (MF), finite element (FE), and computer-aided engineering (CAE), were used to run the simulations. (3) Results: It was found that the printing position of the part in the printer had an impact on deformations. When the part was simulated in a tilted position but alone (deformation: 7.19 mm), the value of the deformation was 1.49 mm greater than when the other parts (two comparable parts) were simulated at the same time (deformation: 5.7 mm). The difference between the simulation with the three parts together (deformation: 5.7 mm) and reality (deformation: 3.44 mm) was 2.26 mm. Finally, the difference between the simulated single part (deformation: 7.19 mm) and the real part (deformation: 3.44) was 3.75 mm. (4) Conclusions: The results of this study will contribute to a better understanding of deformation mechanisms and will suggest solutions for improving the quality of printed parts. Three-dimensional printing is a rapidly growing technology that offers numerous possibilities across various fields. However, one commonly encountered issue is the deformation of printed parts. Methods for minimizing deformations were studied during the 3D printing process using HP MJF technology. Various factors contributing to deformation were investigated, and different techniques for reducing them were explored.
Work on hydraulic presses is defined by a static forging force. This force may have in special cases of forging properties of dynamic and shock load. Commonly used hydraulic presses can use speed-forging with speed up to 180 strokes per minute. Our goal is to compare different types of frame designs used for hydraulic forging presses. Result is determination of the suitability of each supporting structures for these special operations. Comparing is made using FEM modal analysis. The performed modal analysis show needs for lowering of first critical natural frequency. An overview of these frequencies is shown in attached tables
Most injection-moulded plastics are injection moulded into moulds made from conventional materials such as steel or aluminium. The production costs of the mould are considerable. 3D printing from plastic can be used for injection moulds to save these costs. This article deals with injection moulding into a 3D-printed plastic mould. The injection insert was produced on a HP Multi Jet Fusion 4200 3D printer. The other part of the mould was made of aluminium. A custom injection mould was designed for the research. One insert was made from plastic, and one from aluminium. Both moulds were injected under the same injection conditions. A comparison of injection moulding into the plastic and aluminium inserts is made in this article. The difference when injection moulding into the plastic insert is explained using the different technological conditions. The part injected into the plastic insert was also different from the part injected into the aluminium insert. The difference is explained in this article. This article also looks at the interface between the injection-moulded part and the plastic insert using an electron microscope. The images taken clarify the differences between injection moulding into a plastic insert and an aluminium insert and the differences of the injection-moulded part from the plastic insert.