Water pollution, mostly due to industrial discharge, is considered to be one of the significant challenges globally. There are various industries like leather tanning, electroplating, textile and dyeing units which heavily contribute to the pollution of aquatic system by heavy metals. These heavy metals being non-biodegradable and toxic assemble in the living beings, leading to severe health issues and damage to the environment. Among various water treatment mechanisms, adsorption is considered as one of the most effective ways to treat waste water, offering advantages such as simple design, non-toxicity, cost effectiveness, and better efficiency in discarding pollutants in spite of very low concentrations. In thepast, natural polymer based composites for adsorption process has gained significant popularity. In this context, chitin-based nanocomposites have shown great potential on account of their renewable, biocompatible, and eco-friendly traits, making them ideal candidate for the elimination of heavy metals. Chitin, owing to its built-in antibacterial properties, functional versatility and biodegradability, is utilized to fabricate composites and nanocomposites that effectively bind the metal ions and remove it from wastewater. The unique structure of chitin, with numerous functional groups, provides effective chelation sites that facilitate excellent binding of metal ions. This review highlights the extraction, properties and modification of chitin. Further it deals with the development of chitinbased composites as effective adsorbents in heavy metal ions eradication out of the contaminated water.
Soil is the upper layer of the earth’s surface, consisting of a mixture of organic matter, clay, and rock particles, and it serves as the medium in which plants grow. The quality of soil plays a crucial role in agricultural activities and is vital for ensuring the safety of agricultural products. This study focuses on the assessment of soil properties within various remote areas of Pandit Deendayal Upadhyaya Adarsha Mahavidyalaya (PDUAM) located in Dalgaon, Darrang, Assam. The investigation seeks to comprehensively evaluate some of the key soil characteristics, including pH levels, electrical conductivity (EC), and some of the important ions present in the soil matrix using basic chemical laboratory experiments. By undertaking this detailed analysis, the aim is to gain an understanding of the soil fertility in these remote regions, where extensive agricultural practices are carried out. The study reveals that more than 80% of the soil samples have required pH within the fertile range. The observed conductivity value indicates the presence of sufficient soluble ions. Recognizing the pivotal role of soil in sustaining agricultural ecosystems, this study contributes to the broader discourse on optimizing agricultural practices. The findings from the assessment will not only enhance knowledge on soil health but also shall offer valuable insights for agricultural stakeholders in this area.
In this study, starch‐rice husk (RH) based composite films were fabricated by loading 10–40 wt% of rice husk into starch matrix and various properties were evaluated. Fourier transform infrared (FTIR) analysis showed interaction between starch and rice husk through hydrogen bonding, with 20 wt% rice husk loading (RH/ST‐02) exhibits greater hydroxyl shift toward lower wavenumber (3430 cm −1 ). The tensile strength (9.046 MPa) and Young's modulus (7.712 MPa) were found to be highest in RH/ST‐02. Thermogravimetric analysis (TGA) revealed improved thermal stability for RH/ST‐02, which also showed highest limiting oxygen index (LOI) of 32.49%, indicating enhanced flame‐retardant behavior. RH/ST‐02 also demonstrated the lowest water uptake and improved acid and alkali resistance, while scanning electron microscope (SEM) revealed a compact and homogeneous morphology. Soil burial studies confirmed the biodegradable nature of all composite films, with RH/ST‐02 showing almost 80% weight loss after 72 days. The findings revealed that RH/ST‐02 shows an optimum reinforcement level, beyond which excessive filler loading may disrupt matrix continuity and results in less homogeneous morphology, thereby affecting the overall properties of the film. The novelty of this work lies in the valorization of locally available rice husk agricultural waste as a reinforcing agent for starch‐based films.