Numerical simulation of impact and shock-wave interactions of deformable solids is an urgent problem. The key to the adequacy and accuracy of simulation is the material model that links the yield strength with accumulated plastic strain, strain rate, and temperature. A material model often used in engineering applications is the empirical Johnson–Cook (JC) model. However, an increase in the impact velocity complicates the choice of the model constants to reach agreement between numerical and experimental data. This paper presents a method for the selection of the JC model constants using an optimization algorithm based on the Nesterov gradient-descent method. A solution quality function is proposed to estimate the deviation of calculations from experimental data and to determine the optimum JC model parameters. Numerical calculations of the Taylor rod-on-anvil impact test were performed for cylindrical copper specimens. The numerical simulation performed with the optimized JC model parameters was in good agreement with the experimental data received by the authors of this paper and with the literature data. The accuracy of simulation depends on the experimental data used. For all considered experiments, the calculation accuracy (solution quality) increased by 10%. This method, developed for selecting optimized material model constants, may be useful for other models, regardless of the numerical code used for high-velocity impact simulations.
A fully conservative first order accuracy smooth particle method is proposed for elastic-plastic flows. The paper also provides an algorithm for calculating free boundary conditions. A weak variational formulation is used to achieve energy and momentum conservation and to decrease an order of spatial derivatives for the boundary condition calculation, and the Taylor series expansion is used for restoring particle inconsistence and for getting at least the first order of accuracy of spatial derivatives. The approach proposed allows us to avoid the “ghost” particle usage.
This paper is devoted to numerical modeling of heat transfer processes and estimation of thermal stresses in weld seams created by electron beam welding of heterogeneous metals. The mathematical model is based on a system of equations that includes the Lagrange’s variational equation of theory of plasticity and variational equation of M. Biot’s principle to simulate the heat transfer processes. The two-dimensional problems (plane strain and plane stress) are considered for estimation of thermal stresses in welds considering differences of mechanical properties of welded materials. The model is developed for simulation of temperature fields and stresses during electron beam welding.
This paper proposes a wavelet based numerical method for the solution of elastoplastic problem. The method is based on the Lagrange variational equation of elastic static and the Haar wavelet transform of the components of deformation field. Some examples of analysis of multilevel deformation are shown for the demonstration of the method’s capabilities. Some differences in the wavelet spectrums of multilevel inhomogeneous media are shown and discussed.