This paper proposes a real-time nonlinear model predictive control (NMPC) strategy for direct yaw moment control (DYC) of distributed drive electric vehicles (DDEVs). The NMPC strategy is based on a control-oriented model built by integrating a single track vehicle model with the Magic Formula (MF) tire model. To mitigate the NMPC computational cost, the continuation/generalized minimal residual (C/GMRES) algorithm is employed and modified for real-time optimization. Since the traditional C/GMRES algorithm cannot directly solve the inequality constraint problem, the external penalty method is introduced to transform inequality constraints into an equivalently unconstrained optimization problem. Based on the Pontryagin's minimum principle (PMP), the existence and uniqueness for solution of the proposed C/GMRES algorithm are proven. Additionally, to achieve fast initialization in C/GMRES algorithm, the varying predictive duration is adopted so that the analytic expressions of optimally initial solutions in C/GMRES algorithm can be derived and gained. A Karush-Kuhn-Tucker (KKT) condition based control allocation method distributes the desired traction and yaw moment among four independent motors. Numerical simulations are carried out by combining CarSim and Matlab/Simulink to evaluate the effectiveness of the proposed strategy. Results demonstrate that the real-time NMPC strategy can achieve superior vehicle stability performance, guarantee the given safety constraints, and significantly reduce the computational efforts.

A supervisory control strategy, including dynamic control supervisor, handling-stability controller, energy efficiency controller, and coordinated torque allocator, is proposed for distributed drive electric vehicles to coordinate vehicle handling, lateral stability, and energy economy performance. In the dynamic control supervisor, first, the phase plane analysis is implemented to accurately define the vehicle stability boundary so that the lookup table of bounds can be established for online applications. Subsequently, based on the feedback drive conditions and vehicle states, the identified boundary is dynamically quantified by the designed varying weight factor (VWF) in real time. In the handling-stability controller, a unified yaw rate reference of VWF is developed to simultaneously guarantee vehicle maneuverability and lateral stabilization. Then, a novel integral triple-step method is proposed to calculate the proper direct yaw moment for the desired vehicle motion. In the energy efficiency controller, the interaxle torque distribution map is optimized for optimal vehicle energy economy. In the coordinated torque allocator, a torque increment allocation problem is formulated and optimized to realize the desired forces, meanwhile, based on VWF to minimize energy consumption and tire workload usage. The validations of the proposed strategy are conducted under various maneuvers, yielding comprehensive improvements in terms of vehicle handling, lateral stability, and energy performance.

Typical active safety systems that control the dynamics of passenger cars rely on the real-time monitoring of the vehicle sideslip angle (VSA), together with other signals such as the wheel angular velocities, steering angle, lateral acceleration, and the rate of rotation about the vertical axis, which is known as the yaw rate. The VSA (also known as the attitude or “drifting” angle) is defined as the angle between the vehicle’s longitudinal axis and the direction of travel, taking the centre of gravity as a reference. It is basically a measure of the misalignment between vehicle orientation and trajectory; therefore, it is a vital piece of information enabling directional stability assessment, such as in transience following emergency manoeuvres, for instance. As explained in the introduction, the VSA is not measured directly for impracticality, and it is estimated on the basis of available measurements such as wheel velocities, linear and angular accelerations, etc. This work is intended to provide a comprehensive literature review on the VSA estimation problem. Two main estimation methods have been categorised, i.e., observer-based and neural network-based, focussing on the most effective and innovative approaches. As the first method normally relies on a vehicle model, a review of the vehicle models has been included. The advantages and limitations of each technique have been highlighted and discussed.

Electric vehicles (EVs) with four individually controlled drivetrains are over-actuated systems, and therefore, the total wheel torque and yaw moment demands can be realized through an infinite number of feasible wheel torque combinations. Hence, an energy-efficient torque distribution among the four drivetrains is crucial for reducing the drivetrain power losses and extending driving range. In this paper, the optimal torque distribution is formulated as the solution of a parametric optimization problem, depending on the vehicle speed. An analytical solution is provided for the case of equal drivetrains, under the experimentally confirmed hypothesis that the drivetrain power losses are strictly monotonically increasing with the torque demand. The easily implementable and computationally fast wheel torque distribution algorithm is validated by simulations and experiments on an EV demonstrator, along driving cycles and cornering maneuvers. The results show considerable energy savings compared to alternative torque distribution strategies.

This paper proposes a computationally efficient path following control strategy of autonomous electric vehicles (AEVs) with yaw motion stabilization. First, the nonlinear control-oriented model including path following model, single track vehicle model, and Magic Formula tire model, are constructed. To handle the stability constraints with ease, the nonlinear model predictive control (NMPC) technique is applied for path following issue. Here NMPC control problem is reasonably established with the constraints of vehicle sideslip angle, yaw rate, steering angle, lateral position error, and Lyapunov stability. To mitigate the online calculation burden, the continuation/ generalized minimal residual (C/GMRES) algorithm is adopted. The deadzone penalty functions are employed for handling the inequality constraints and holding the smoothness of solution. Moreover, the varying predictive duration is utilized in this paper so as to fast gain the good initial solution by numerical algorithm. Finally, the simulation validations are carried out, which yields that the proposed strategy can achieve desirable path following and vehicle stability efficacy, while greatly reducing the computational burden compared with the NMPC controllers by active set algorithm or interior point algorithm.

Electric vehicles with independently controlled drivetrains allow torque vectoring, which enhances active safety and handling qualities. This article proposes an approach for the concurrent control of yaw rate and sideslip angle based on a single-input single-output (SISO) yaw rate controller. With the SISO formulation, the reference yaw rate is first defined according to the vehicle handling requirements and is then corrected based on the actual sideslip angle. The sideslip angle contribution guarantees a prompt corrective action in critical situations such as incipient vehicle oversteer during limit cornering in low tire-road friction conditions. A design methodology in the frequency domain is discussed, including stability analysis based on the theory of switched linear systems. The performance of the control structure is assessed via: 1) phase-plane plots obtained with a nonlinear vehicle model; 2) simulations with an experimentally validated model, including multiple feedback control structures; and 3) experimental tests on an electric vehicle demonstrator along step steer maneuvers with purposely induced and controlled vehicle drift. Results show that the SISO controller allows constraining the sideslip angle within the predetermined thresholds and yields tire-road friction adaptation with all the considered feedback controllers.