The increase of popularity of reactivity-controlled compression ignition (RCCI) is attributed to its capability of achieving ultra-low nitrogen oxides (NOx) and soot emissions with high brake thermal efficiency (BTE). The complex and nonlinear nature of the RCCI combustion makes it challenging for model-based control design. In this work, a model-based control system is developed to control the combustion phasing and the indicated mean effective pressure (IMEP) of RCCI combustion through the adjustments of total fuel energy and blend ratio (BR) in fuel injection. A physics-based nonlinear control-oriented model (COM) is developed to predict the main combustion performance indicators of an RCCI marine engine. The model is validated against a detailed thermo-kinetic multizone model. A novel linear parameter-varying (LPV) model coupled with a model predictive controller (MPC) is utilized to control the aforementioned parameters of the developed COM. The developed system is able to control combustion phasing and IMEP with a tracking error that is within a 5% error margin for nominal and transient engine operating conditions. The developed control system promotes the adoption of RCCI combustion in commercial marine engines.
Radio waves provide a useful diagnostic tool to investigate the properties of the ionosphere because the ionosphere affects the transmission and properties of high frequency (HF) electromagnetic waves. We have conducted a transionospheric HF‐propagation research campaign with a nanosatellite on a low‐Earth polar orbit and the EISCAT HF transmitter facility in Tromsø, Norway, in December 2020. In the active measurement, the EISCAT HF facility transmitted sinusoidal 7.953 MHz signal which was received with the High frEquency rAdio spectRomEteR (HEARER) onboard 1 Unit (size: 10 × 10 × 10 cm) Suomi 100 space weather nanosatellite. Data analysis showed that the EISCAT HF signal was detected with the satellite's radio spectrometer when the satellite was the closest to the heater along its orbit. Part of the observed variations seen in the signal was identified to be related to the heater's antenna pattern and to the transmitted pulse shapes. Other observed variations can be related to the spatial and temporal variations of the ionosphere and its different responses to the used transmission frequencies and to the transmitted O‐ and X‐wave modes. Some trends in the observed signal may also be associated to changes in the properties of ionospheric plasma resulting from the heater's electromagnetic wave energy. This paper is, to authors' best knowledge, the first observation of this kind of “self‐absorption” measured from the transionospheric signal path from a powerful radio source on the ground to the satellite‐borne receiver.
The increasing demands for reducing fuel consumption and emissions in contemporary technology solutions lead to the use of more sensors, actuators, and control applications. With this increasing engine complexity, the feedback design is complex due to the coupling between inputs and combustion parameters. To be able to design the controller systematically, model predictive control (MPC) comes to the scope because of its advantages in the design of multi-input multi-output (MIMO) systems, especially with its constraints handling ability and performance in simultaneously optimizing the engine fuel efficiency and emission reduction. Multi-injection is one of the promising techniques for achieving better engine performance. In this work, post-injection control is implemented utilizing MPC MIMO strategy with the target of exploring the possibility of reducing emissions and improving engine efficiency by controlling post-injection duration and injection timing. The workflow of the MPC controller design from control-oriented model (COM) establishing to MPC problem formation and solution methodology is discussed in this work. Moreover, one contribution from this work is the different implementation angle when compared with the state-of-the-art approaches, where the MPC controller is implemented purely by Matlab Simulink to enable the rapid control prototyping design. The simulation result demonstrated the ability of the controller's tracking performance and showed a preliminary step towards the nonlinear combustion model-based multi-injection MPC design. The systematic model-based controller framework developed in this work can be applied to other control applications and enables a fast path from design to test.
In this work, a model predictive controller is developed for a multiple injection combustion model. A 1D engine model with three distinct injections is used to generate data for identifying the state-space representation of the engine model. This state-space model is then used to design a controller for controlling the start of injection and injected fuel mass of the post injection. These parameters are used as inputs for the engine model to control the maximum cylinder pressure and indicated mean effective pressure.