A technique for controlling and optimizing injection molding parameters by numerical simulation is proposed. Using this method for an optical element designed for roadway lighting, multilens molding quality criteria have been defined. Optimal parameters for lens manufacturing have been determined. Based on these parameters, a polycarbonate multilens has been made with an absolute tolerance equal to 0.01 mm.
Hybrid methods combining the geometrical-optics and diffraction-theory methods enable designing diffractive optical elements (DOEs) with high performance due to the suppression of stray light and speckles and, at the same time, with a regular and fabrication-friendly microrelief. Here, we propose a geometrical-optics method for calculating the eikonal function of the light field providing the generation of a required irradiance distribution. In the method, the problem of calculating the eikonal function is formulated in a semi-discrete form as a problem of maximizing a concave function. For solving the maximization problem, a gradient method is used, with analytical expressions obtained for the gradient. In contrast to geometrical-optics approaches based on solving the Monge–Ampére equation using finite difference methods, the proposed method enables generating irradiance distributions defined on disconnected regions with non-smooth boundaries. As an example, we calculate an eikonal function, which provides the generation of a "discontinuous" irradiance distribution in the form of a hexagram. It is shown that the utilization of the hybrid approach, in which the obtained geometrical-optics solution is used as a starting point in iterative Fourier transform algorithms, enables designing DOEs with a quasi-regular or piecewise-smooth microrelief structure. The calculation results are confirmed by the results of experimental investigations of a DOE generating a hexagram-shaped irradiance distribution.
We propose a method for designing a refractive optical element with two working surfaces transforming an incident beam with a plane wavefront into an output beam with prescribed irradiance distribution and a non-planar wavefront. The presented method generalizes the supporting quadric method [ Opt. Express 28, 22642 (2020)10.1364/OE.398990 ] proposed for collimated beam shaping to the case of a non-planar output wavefront. The method is simple to implement and is based on just a few main equations. We present several examples of designing optical elements (including elements with piecewise-smooth optical surfaces) generating light beams with prescribed irradiance distributions and wavefronts (spherical and aspherical). The examples demonstrate high performance of the method.
We propose a method for designing optical elements with two freeform refracting surfaces generating prescribed non-axisymmetric irradiance distributions in the case of an extended light source. The method is based on the representation of the optical surfaces as bicubic splines and on the subsequent optimization of their parameters using a quasi-Newton method. For the fast calculation of the merit function, we propose an efficient version of the ray tracing method. Using the proposed approach, we design optical elements generating uniform square-shaped irradiance distributions in the far- and near-field. The designed elements are very compact (the height-to-source ratio is only 1.6) and, while providing a high lighting efficiency of 89%, generate highly uniform distributions (the ratio between minimum and average irradiance values in the prescribed square-shaped region exceeds 0.9).
We present a gradient method for designing cascaded diffractive optical elements (DOEs) consisting of several sequentially located phase DOEs. Using the unitarity property of the operator of light propagation through the cascaded DOE, we obtain explicit expressions for the derivatives of the error functional with respect to the phase functions of the cascaded DOE. We consider the application of the gradient method to the problem of focusing different incident beams to regions with different intensity distributions and to the problem of optical image classification. The presented description of the gradient method treats the problems of designing cascaded DOEs for focusing laser radiation and for image classification within a unified approach reducing the calculation of the derivatives of the error functionals to the same formula. We present examples of the calculation of single and cascaded DOEs for focusing different incident beams to different regions and for classifying handwritten digits, which demonstrate the high performance of the proposed method. The presented results may find application in the design of diffractive neural networks and systems for focusing laser radiation.
To improve the optical performance of LED-based lighting devices, refractive optical elements are usually used. We propose a novel technique for the computation of free-form optical elements with two refractive surfaces generating the required illuminance or intensity distribution. The proposed approach makes it possible to control the balance of deflection angles between the inner and outer surfaces of the optical element. It has been proved that for the point light source, the maximal efficiency is obtained when each refractive surface performs exactly the half of the required ray deflection. As an example, a set of optical elements producing a uniformly illuminated square region is computed. Simulation of the computed designs with extended sources has shown that the most tolerant solutions to the size of the light source are obtained in the case when the inner surface performs 60–80% of the ray deflection, and the outer surface performs the remaining 20–40%. The influence of deflection balance on the size of the optical element is discussed.