Jun Cai

Prof. Dr. Jun Cai

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 March 2020 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
Jun CaiJun Cai
Jun Cai
XZXingqiang Zhao
Xingqiang Zhao
This paper presents a power converter topology with integrated driving and charging capability of switched reluctance motor (SRM) drive for electric vehicle (EV) application. In the driving mode, the bus voltage can be adjusted flexibly by the front-end buck converter, which meets the requirements of the speed open-loop and closed-loop control. Besides, higher voltage demagnetization can be achieved by connecting the upper freewheeling diodes of the asymmetric half-bridge converter to the battery bank, thus can accelerate the demagnetization process, extend the dwell angle and enhance the output of the motor. In battery charging mode, a bridgeless rectifier converter is constructed by utilizing two-phase windings of the SRM and the existing power devices of integrated power converter, without additional inductors and charging units. The battery charging and power factor correction (PFC) control can be realized by closed-loop control of charging current. Detailed analysis and experiments on a 1kW 12/8 structure prototype SRM validate the effectiveness of the proposed technologies.

15 December 2023 in Sci
Verified
Journal Article
Open access
PDF file
EZEmma Yann Zhang
Emma Yann Zhang
Adrian David CheokAdrian David Cheok
Adrian David Cheok
ZPZhigeng Pan
Zhigeng Pan
Jun CaiJun Cai
Jun Cai
Ying YanYing Yan
Ying Yan
In recent years, generative transformers have become increasingly prevalent in the field of artificial intelligence, especially within the scope of natural language processing. This paper provides a comprehensive overview of these models, beginning with the foundational theories introduced by Alan Turing and extending to contemporary generative transformer architectures. The manuscript serves as a review, historical account, and tutorial, aiming to offer a thorough understanding of the models’ importance, underlying principles, and wide-ranging applications. The tutorial section includes a practical guide for constructing a basic generative transformer model. Additionally, the paper addresses the challenges, ethical implications, and future directions in the study of generative models.

4 July 2017 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Jun CaiJun Cai
Jun Cai
ZDZhiquan Deng
Zhiquan Deng
Factors such as machining precision and electrical failures may lead to phase inductance unbalance in a switched reluctance motor (SRM). Under unbalanced inductance conditions, most of the traditional sensorless schemes would be invalid if no modification is applied. To prove the existence of this problem, an inductance partition based rotor position estimation scheme under balanced and unbalanced inductance conditions are investigated and compared for identifying the position estimation error characteristics. The theoretical analysis shows that the position estimation error is highly dependent on the degree of the inductance unbalance. To maintain stable sensorless operation under unbalanced condition, a modified full-cycle inductance partition based rotor position estimation scheme with unbalanced inductance adaptive capability is proposed in this paper. In this method, the linear region of each phase full-cycle inductance is relocated with the predetermined inductance thresholds. By locating the linear inductance regions, the rotor position can be estimated from a simple partition linear model between the rotor position and the phase inductance. This method is easy for implementation without additional hardware and complex calculation. Experiments are performed on a 12/8 structure SRM and the results verify the effectiveness of the proposed method.

28 November 2019 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
Jun CaiJun Cai
Jun Cai
ZLZeyuan Liu
Zeyuan Liu
In this paper, a universal sensorless starting scheme considering magnetic saturation effects is proposed to control the switched reluctance motor (SRM) drives. In this approach, the full-cycle unsaturated inductance can be reconstructed by converting the saturated incremental inductance into the unsaturated inductance with a simple mathematical model in the conduction region. Based on the reconstructed three-phase full-cycle unsaturated inductance, the inductance vector coordinate transformation method and the linear region inductance model based method can be applied for estimating the rotor position even under high load starting case. To verify the validity of the proposed methods, experiments have been implemented in a 1kW three-phase 12/8 structure SRM prototype. The experimental results verify that the unsaturated inductance reconstruction scheme can transfer the nonlinear magnetic saturation problem into an unsaturation problem, and thus the rotor position estimation at the sensorless starting state can be simplified. The method can realize the initial position estimation and reliable sensorless starting control even under load conditions with only very simple initial inductance data acquisition, position partition logics design, and mathematic modeling. In addition, as the back-EMF is eliminated indirectly in the inductance calculation process, the adaptable speed range can also be extended.

24 October 2018 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Jun CaiJun Cai
Jun Cai
ZLZeyuan Liu
Zeyuan Liu
YZYu Zeng
Yu Zeng
A sensorless control strategy with one-phase lacking fault-tolerant capability is proposed in this paper for the switched reluctance motors (SRM). This strategy consists of a phase inductance slope zero-crossing detection scheme and a series of phase inductance partition logic algorithms, which is capable of capturing at least one-phase aligned position under both normal operation and one-phase lacking fault operation. With the recorded index position in each electric period, the rotor position can be estimated for sensorless driving accordingly. To ensure stable calculation of the phase inductance in this method, the SRM should be started and operated under single pulse control mode. Thus, for sensorless starting, an idle phase inductance double thresholds based sensorless synthetic starting scheme is also developed. The proposed strategy is easy for implementation and can ensure stable sensorless operation in full speed range. Moreover, it does not need any priori measuring process, complicated logic algorithm or complex mathematical calculation. The theoretical analysis is conducted, and experimental results are provided to verify the feasibility of the proposed control strategy.

27 November 2020 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
Jun CaiJun Cai
Jun Cai
Ying YanYing Yan
Ying Yan
WZWan Zhang
Wan Zhang
XZXingqiang Zhao
Xingqiang Zhao
In this paper, a synthetic sensorless starting scheme, which is based on pulse injection technology, is proposed for switched reluctance motor (SRM) drives to enhance the starting reliability. This scheme consists of a set of sensorless position estimation algorithms for different stages of SRM starting. In order to start the SRM from standstill stage smoothly, the initial driving phase is selected by pairwise comparing of the three-phase inductance. Then, to ensure reliable starting acceleration, a double inductance dynamic thresholds algorithm is developed for estimating the direct phase-driving signals. Meanwhile, to estimate the real-time rotor position, a position index pulse estimation algorithm, which is with phase lacking fault-tolerant capability, is developed based on an idle phase inductance threshold. By seamless switching between the above mentioned two algorithms, higher reliability of the sensorless starting control can be achieved. Furthermore, the performance of three pulse injection methods are compared, and the best one is then selected to reduce the influences of the high frequency pulse signals in the idle phases. The theoretical analysis and experimental results are provided to verify the feasibility of the proposed control scheme.