The sensing of gravity has emerged as a tool in geophysics applications such as engineering and climate research1–3, including the monitoring of temporal variations in aquifers4 and geodesy5. However, it is impractical to use gravity cartography to resolve metre-scale underground features because of the long measurement times needed for the removal of vibrational noise6. Here we overcome this limitation by realizing a practical quantum gravity gradient sensor. Our design suppresses the effects of micro-seismic and laser noise, thermal and magnetic field variations, and instrument tilt. The instrument achieves a statistical uncertainty of 20 E (1 E = 10−9 s−2) and is used to perform a 0.5-metre-spatial-resolution survey across an 8.5-metre-long line, detecting a 2-metre tunnel with a signal-to-noise ratio of 8. Using a Bayesian inference method, we determine the centre to ±0.19 metres horizontally and the centre depth as (1.89 −0.59/+2.3) metres. The removal of vibrational noise enables improvements in instrument performance to directly translate into reduced measurement time in mapping. The sensor parameters are compatible with applications in mapping aquifers and evaluating impacts on the water table7, archaeology8–11, determination of soil properties12 and water content13, and reducing the risk of unforeseen ground conditions in the construction of critical energy, transport and utilities infrastructure14, providing a new window into the underground.
26 June 2017 in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
The high precision and scalable technology offered by atom interferometry has the opportunity to profoundly affect gravity surveys, enabling the detection of features of either smaller size or greater depth. While such systems are already starting to enter into the commercial market, significant reductions are required in order to reach the size, weight and power of conventional devices. In this article, the potential for atom interferometry based gravimetry is assessed, suggesting that the key opportunity resides within the development of gravity gradiometry sensors to enable drastic improvements in measurement time. To push forward in realizing more compact systems, techniques have been pursued to realize a highly portable magneto-optical trap system, which represents the core package of an atom interferometry system. This can create clouds of 10 7 atoms within a system package of 20 l and 10 kg, consuming 80 W of power. This article is part of the themed issue ‘Quantum technology for the 21st century’.
Time domain reflectometry (TDR) measures the apparent relative dielectric permittivity (ARDP) of a soil and is commonly used to determine the volumetric water content (VWC) of the soil. ARDP is affected by several factors in addition to water content, such as the soil’s electrical conductivity, temperature, and density. These relationships vary with soil type and are very soil-dependent, and despite previous research, they are still not fully understood. A multivariate statistical approach (principal component analysis, PCA) is used to describe a range of soils from two separate sites in the UK (clay and silty sand – sandy silt). The advantage of a PCA is that it considers several variables at a time, giving an immediate picture of their underlying relationships. It was found that for the studied soils, ARDP was positively correlated with VWC and bulk electrical conductivity, but did not show any dependence on some other geotechnical parameters. TDR has recently been used in geotechnical engineering for measuring the gravimetric water content (GWC) and dry density. However, the current approaches require a custom-made TDR probe and an extensive site specific empirical laboratory calibration. To extend the potential use of TDR in the geotechnical industry, three relatively simple methods are proposed to estimate the GWC from VWC (derived from the measured ARDP values) and dry density depending on the amount of information known about the soil. Examples of possible applications of these methods include continuous monitoring of consolidation adjacent to a structure, the effect of seasonal weather and climate change on ageing earthwork assets, and the shrink–swell potential adjacent to trees. All three methods performed well, with between 83% and 98% of the data lying within a ±5% GWC envelope, with the data for clay soils performing better than those for silty sands – sandy silts. This is partly due to the fact that the applied relationship converting ARDP to VWC performs better for clays than silty sands – sandy silts, as well as less variation of the estimated bulk density that is needed to derive the dry density.
Gravity sensing is a valuable technique used for several applications, including fundamental physics, civil engineering, metrology, geology, and resource exploration. While classical gravimeters have proven useful, they face limitations, such as mechanical wear on the test masses, resulting in drift, and limited measurement speeds, hindering their use for long-term monitoring, as well as the need to average out microseismic vibrations, limiting their speed of data acquisition. Emerging sensors based on atom interferometry for gravity measurements could offer promising solutions to these limitations, and are currently advancing towards portable devices for real-world applications. This article provides a brief state-of-the-art review of portable atom interferometry-based quantum sensors and provides a perspective on routes towards improved sensors.