The eutectic mixture of MgCl2–KCl molten salt is a high temperature heat transfer and thermal storage fluid able to be used at temperatures up to 800 °C in concentrating solar thermal power systems. The molten salt thermophysical properties are reported including vapor pressure, heat capacity, density, viscosity, thermal conductivity, and the corrosion behavior of nickel-based alloys in the molten salt corrosion at high temperatures. Correlations of the measured properties as functions of molten salt temperatures are presented for industrial applications. The test results of tensile strength of two nickel-based alloys exposed in the molten salt at a temperature of 800 °C from 1-week length to 16-week length are reported. It was found that the corrosion and strength loss is rather low when the salt is first processed to remove water and oxygen.
Thermal storage has been considered as an important measure to extend the operation of a concentrated solar power plant by providing more electricity and meeting the peak demand of power in the time period from dusk to late night everyday, or even providing power on cloudy days. Discussed in this paper is thermal energy storage in a thermocline tank having a solid filler material. To provide more knowledge for designing and operating of such a thermocline storage system, this paper firstly presents the application of method of characteristics for numerically predicting the heat charging and discharging process in a packed bed thermocline storage tank. Nondimensional analysis of governing equations and numerical solution schemes using the method of characteristics were presented. The numerical method proved to be very efficient, accurate; required minimal computations; and proved versatile in simulating various operational conditions for which analytical methods cannot always provide solutions. Available analytical solutions under simple boundary and initial conditions were used to validate the numerical modeling and computation. A validation of the modeling by comparing the simulation results to experimental test data from literature also confirmed the effectiveness of the model and the related numerical solution method. Finally, design procedures using the numerical modeling tool were discussed and other issues related to operation of a thermocline storage system were also studied.
11 January 2021 in Journal of Solar Energy Engineering
A new eutectic chloride molten salt, MgCl2-KCl-NaCl (wt.% 45.98-38.91-15.11), has been recognized as one of the most promising high-temperature heat-transfer fluids (HTF) for both heat transfer and thermal storage for the 3rd Generation concentrated solar thermal power (CSP) systems. For the first time, some essential thermophysical properties of this eutectic chloride molten salt needed for basic heat transfer and energy storage analysis in the application of concentrating solar power systems have been experimentally tested and provided as functions of temperature in the range from 450 °C to 700 °C. The studied properties include heat capacity, melting point, heat of fusion, viscosity, vapor pressure, density, and thermal conductivity. The property equations provide essential database for engineers to use to calculate convective heat transfer in concentrated solar receivers, heat exchangers, and thermal storage for concentrated solar power plants.