The water absorption measurements of a novel superabsorbent anionic hydrogel, H-Na-PCMSA-g-PAN, has been reported first time in water with a poor conductivity, 0.15 M saline (NaCl, CaCl_2, and AlCl₃) solutions, and simulated urine (SU) solutions at various times. The hydrogel has been prepared by the saponification of the graft copolymer, Na-PCMSA-g-PAN (%G = 316.53, %GE = 99.31). Results indicated that as compared to the swelling capacity values evaluated in water with a poor conductivity, the ability of the hydrogel to swell in various saline solutions with the same concentration is significantly reduced at all different durations. The swelling tends to be Na⁺ > Ca²⁺ > Al³⁺ at the same saline concentration in the solution. Studies of the absorbency in various aqueous saline (NaCl) solutions also revealed that the swelling capacity decreased as the ionic strength of the swelling medium rose, which is consistent with the experimental results and Flory’s equation. Furthermore, the experimental results strongly suggested that second-order kinetics governs the swelling process of the hydrogel in various swelling media. The swelling characteristics and equilibrium water contents for the hydrogel in various swelling media have also been researched. The hydrogel samples have been successfully characterized by FTIR to show the change in chemical environment to COO⁻ and CONH₂ groups after swelling in different swelling media. The samples have also been characterized by SEM technique.

An efficient redox initiating system, ceric ammonium nitrate/nitric acid, has been employed for the first time to carry out photo-induced graft copolymerization of acrylonitrile (AN) onto sodium salt of partially carboxymethylated sodium alginate, having an average degree of substitution value to be 1.10. The photo-grafting reaction conditions for maximum grafting have been systematically optimized by varying the reaction variables such as reaction time, temperature, the concentration of acrylonitrile monomer, ceric ammonium nitrate, and nitric acid, as well as the amount of the backbone. The optimum reaction conditions are obtained with a reaction time of 4 h, reaction temperature of 30 °C, acrylonitrile monomer concentration of 0.152 mol/L, initiator concentration of 5 × 10⁻³ mol/L, nitric acid concentration of 0.20 mol/L, amount of backbone of 0.20 (dry basis) and the total volume of the reaction system of 150 mL. The highest percentage of grafting (%G) and grafting efficiency (%GE) achieved are 316.53% and 99.31%, respectively. The optimally prepared graft copolymer, sodium salt of partially carboxymethylated sodium alginate-g-polyacrylonitrile (%G = 316.53), has been hydrolyzed in an alkaline medium (0.7N NaOH, 90–95 °C for ~2.5 h) to obtain the superabsorbent hydrogel, H–Na–PCMSA–g–PAN. The chemical structure, thermal characteristics, and morphology of the products have also been studied.