The aim of this paper is to present a methodology for the calculation of the R-L parameters of a model of a nonlinear hysteretic inductor. The methodology is based on the analysis of the instantaneous magnetising power calculated from the hysteresis loop of the inductor and is completely developed in the time domain. The instantaneous magnetising power is firstly separated into the oscillatory and absorbed components. Thereafter, the parameter R is calculated using the absorbed component and the parameter L using the oscillatory component. The methodology is validated through the comparison of the results for parameters R and L obtained with the proposed method and the existing method based on the Poynting theorem. The validation is demonstrated on the specific simulated cases with idealised parameters of a nonlinear circuit. Additionally, the paper presents results for the parameters R and L calculated from the hysteresis loops measured at frequencies from 1 to 300 Hz. Furthermore, the fitting functions representing the variation of these parameters with the rate of change of magnetic flux density, and the corresponding results, are presented in the paper. A discussion of all the results presented and applicability of the methodology proposed, as well as the concluding remarks, are given thereafter.
A description of magnetic hysteresis is important for the prediction of losses in soft magnetic materials. In this paper, a viscosity-type equation is used to describe dynamic hysteresis loops in an amorphous ring core for symmetric excitation, as prescribed by international standards. The value of the exponent appearing in the viscosity-based equation can be assumed to be constant if the maximum induction is away from the saturation value. The viscosity-type equation is used to describe the shape variation of magnetization curves due to eddy currents in different time and space scales. Modeling is carried out for various excitation frequencies and induction amplitudes. The discrepancies between the experimental and modeled curves (and also losses) are acceptable in the wide range of the frequency and maximum induction. The paper indicates that the viscosity-type effects, mostly due to eddy currents generated in the conductive material, play an important role in energy dissipation at increased excitation frequencies. The modeling results might be interesting to the designers of magnetic circuits.
2 July 2024 in International Journal of Circuit Theory and Applications
The paper discusses the application of Steinmetz-like power laws to the description of total energy losses in Ni-Fe alloys (permalloys). Two types of permalloys with different nickel contents (50% wt. Ni and 79% wt. Ni) were analyzed. A phenomenological two-term formula for the dependence of loss density on frequency and magnetic induction is proposed. For the examined samples the formula yields the averaged errors below 12.3%.
1 January 2019 in "SCIENTIFIC BULLETIN of the POLITEHNICA University Timisoara, Romania Transactions on MATHEMATICS & PHYSICS"
The aim of this paper is to present a way of visualisation of the magnetic field created by permanent magnets or wires and loops carrying direct current. Visualisation is achieved by using so called magnetic field viewer - a special magnetic sensing film. Except visualisation of the magnetic field around the magnetic object, measurements of magnetic flux densities are performed using a Hall sensor. Also, a number of simulations of coils carrying direct current in FEM software have been made in order to check a validation of the visualisation effects obtained. The paper shows photographs of visualised magnetic fields and the results of measurements and simulations, as well as a proper discussion.
Cilj ovog rada je da se prikaže proračun karakteristika strujnog mernog transformatora (ST) sa torusnim jezgrom od feromagnetskog lima. Proračun uzima u obzir magnetski histerezis jezgra primenom metoda interpolacije harmonika na jačinu magnetskog polja i magnetsku indukciju. Na osnovu unapred zadatih karakteristika ST, parametara jezgra i poznate familije histerezisnih petlji vrši se proračun greške prenosnog odnosa i fazne greške za različite vrednosti primarne struje. U radu su prikazane i analizirane vrednosti proračunatih grešaka u opsegu od 5% do 120% naznačene primarne struje ST za 500 A. Dodatno, analizirana je promena grešaka kada se isto jezgro koristi za izradu ST sa naznačenom primarnom strujom u opsegu od 200 A do 1000 A.