Coal-fired boilers, including coal-fired power plants (CFPPs) and coal-fired industrial boilers (CFIBs), are an important area for achieving sustainability globally as they are one of the globally important sources of anthropogenic emissions of heavy metals (HMs) due to huge amount of coal consumption. To date, the investigation of atmospheric emission characteristics, speciation, and potential environmental risks of HMs from coal-fired boilers has received widespread attention and achieved significant progress. To characterise the emissions of HMs from coal-fired boilers, research is currently being carried out in the areas of (1) studying the release of HMs from coal combustion processes, (2) developing emission factors and emission inventories, and (3) revealing the cross-media partitioning of HMs between different output streams. Research on the chemical forms of HMs in waste from coal-fired boiler is currently focused on chemical valence and speciation components. The sequential chemical extraction method is currently the most widely used method for investigating the chemical fractionations of HMs in wastes from coal-fired boilers. Studies indicate that different HM elements display differentiated characteristics of speciation in waste from coal-fired boilers. Early studies on potential environmental risk and ecological risk caused by HMs are usually based on actual monitoring values of HMs in the target environmental media. The risk assessment code method and the leaching toxicity method are the most widely used method to study the potential environmental risk of HMs in waste from coal-fired boilers. With the implementation of global carbon emission reduction strategies, the scale of coal-fired boilers and air pollution control technologies are bound to change in the future. Therefore, as an important component of global efforts to achieve sustainable development, more research is needed in the future to improve the accuracy of emission inventories, reveal the mechanisms of HM chemical transformation, and establish methods for potential environmental risk assessment at regional scales.
13 August 2013 in Journal of Environmental Sciences
The effluent of coking wastewater comprises hundreds of refractory organics and is characterized by high toxicity and non-biodegradation. Electrochemical advanced oxidation processes (EAOPs) have been widely applied in the field of water purification. In this study, a Ti4O7 reactive electrochemical membrane (REM) was prepared using the plasma spraying method for the electro-oxidation of coking wastewater. The composition and surface morphology of the Ti4O7 REM were characterized via X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The computational fluid dynamics (CFD) simulation was used to compare the mass transfer performance of the Ti4O7 REM in traditional batch (TB) mode and flow-through (FT) mode. In the FT mode, the effects of current density and anode–cathode distance on the treatment efficiency were investigated, and the electrocatalytic performance of the anode on coking wastewater was analyzed. The results showed that the COD removal efficiency reached 76.2% with an energy consumption of 110.5 kWh kg−1 COD under the optimal condition. In addition, cathodic polarization provides an effective technique for maintaining the long-term activity of the Ti4O7 REM. The three-dimensional fluorescence results and UV-vis spectrum showed that the aromatic compounds could be effectively degraded using the Ti4O7 REM. The Ti4O7 REM demonstrated excellent performance of electrochemical oxidation and satisfactory stability, which had a strong potential for application in the field of practical wastewater and engineering practices that respond to the concept of sustainable development.