A conducting composite prepared by dispersing multi-walled carbon nanotubes (MWCNTs) into a host matrix consisting of Nafion, electrochemically doped with copper, has been prepared, characterized and used to modify one of the gold electrodes of simply designed electrochemical cells having copier grade transparency sheets as substrates. Electrical measurements performed in deionized water show that the Au/Nafion/Au-MWCNTs–Nafion:Cu cells can be successfully used in order to detect the presence of p-aminophenol (PAP) in water, without the need for any supporting electrolyte. The intensity of the redox peaks arising when PAP is added to deionized water is found to be linearly related to the analyte in the range from 0.2 to 1.6 µM, with a detection limit of 90 nM and a sensitivity of 7 µA·(µM⁻¹)·cm⁻².

The Internet of Things (IoT) is gaining more and more popularity and it is establishing itself in all areas, from industry to everyday life. Given its pervasiveness and considering the problems that afflict today’s world, that must be carefully monitored and addressed to guarantee a future for the new generations, the sustainability of technological solutions must be a focal point in the activities of researchers in the field. Many of these solutions are based on flexible, printed or wearable electronics. The choice of materials therefore becomes fundamental, just as it is crucial to provide the necessary power supply in a green way. In this paper we want to analyze the state of the art of flexible electronics for the IoT, paying particular attention to the issue of sustainability. Furthermore, considerations will be made on how the skills required for the designers of such flexible circuits, the features required to the new design tools and the characterization of electronic circuits are changing.

Focusing on the interplay between interface chemistry, electrochemistry, and integrated electronics, we show a novel low-cost and flexible biosensing platform for continuous glucose monitoring. The amperometric biosensing system features a planar three-electrode structure on a plastic substrate, and a wireless NFC-powered electronic system performing sensor analog front-end (AFE), A/D conversion, digital control, and display tasks. The working electrode is made of electropolymerized poly(3,4-ethylenedioxythiophene) (PEDOT) film onto an Au/PET electrode followed by immobilization of cross-linked glucose oxidase by glutaraldehyde. The advantages offered by such a device, including low-cost materials and instrumentation as well as the good sensitivity of 9.24 μA/(mM · cm2) are promising tools for point-of-care monitoring. It is demonstrated that the devices are good candidates for the development of advanced sensing approaches based on the investigation of the noise produced during operation (Fluctuation Enhanced Sensing).

Electrochemical devices using as substrates copier grade transparency sheets are developed by using ion conducting Nafion:polypyrrole mixtures, deposited between gold bottom electrodes and upper electrodes based on Multi Walled Carbon Nanotubes (MWCNTs). The electrical properties of the Nafion:polypyrrole blends and of the gold/Nafion:polypyrrole/MWCNTs devices are investigated under dry conditions and in deionized water by means of frequency dependent impedance measurements and time domain electrical characterization. According to current-voltage measurements carried out in deionized water, the steady state current forms cycles characterized by redox peaks, the intensity and position of which reversibly change in response to H₂O₂, with a lower detection limit in the micromolar range. The sensitivity that is obtained is comparable with that of other electrochemical sensors that however, unlike our devices, require supporting electrolytes.

In this paper, after discussing some important limitations of the most common circuital configuration that is used for the realization of very low-noise transimpedance amplifiers, we propose and analyze a new circuit topology which allows us to obtain significant advantages as far as equivalent input current noise and bandwidth (BW) are concerned. We present a simple circuit implementation of the new transimpedance amplifier, together with the results of its noise characterization. The comparison between these measurements and those obtained on a conventional transimpedance amplifier with the same transimpedance gain has confirmed that the proposed approach allows us to obtain a lower background noise and a larger BW for the same transimpedance gain.