Construction industry is indirectly the largest source of emissions in the atmosphere, due to the use of cement in concrete. These emissions can be reduced by using industrial waste materials in place of cement. Self-Compacting Concrete (SCC) is a promising material to enhance the use of industrial wastes in concrete. However, there are very few methods available for accurate prediction of its strength, therefore, reliable models for estimating 28-day Compressive Strength (C–S) of SCC are developed in current study by using three Machine Learning (ML) algorithms including Multi Expression Programming (MEP), Extreme Gradient Boosting (XGB), and Random Forest (RF). The ML models were meticulously developed using a dataset of 231 points collected from internationally published literature considering seven most influential parameters including cement content, quantities of fly ash and silica fume, water content, coarse aggregate, fine aggregate, and superplasticizer dosage to predict C–S. The developed models were evaluated using different statistical errors including Root Mean Square Error (RMSE), Mean Absolute Error (MAE), coefficient of determination () etc. The results showed that the XGB model outperformed the MEP and RF model in terms of accuracy with a correlation = 0.998 compared to 0.923 for MEP and 0.986 for RF. Similar trend was observed for other error metrices. Thus, XGB is the most accurate model for estimating C–S of SCC. However, it is pertinent to mention here that it does not give its output in the form of an empirical equation like MEP model. The construction of these empirical models will help to efficiently estimate C–S of SCC for practical purposes.
The design of masonry structures requires accurate estimation of compressive strength (CS) of hollow concrete masonry prisms. Generally, the CS of masonry prisms is determined by destructive laboratory testing which results in time and resource wastage. Thus, this study aims to provide machine learning-based predictive models for CS of hollow concrete masonry blocks using different algorithms including Multi Expression Programming (MEP), Random Forest Regression (RFR), and Extreme Gradient Boosting (XGB) etc. A dataset of 159 experimental results was collected from published literature for this purpose. The collected dataset consisted of four input parameters including strength of masonry units ( ), height-to-thickness ratio (h/t), strength of mortar ( ), and ratio of and only one output parameter i.e., CS. Out of all the algorithms employed in current study, only MEP and GEP expressed their output in the form of an empirical equation. The accuracy of developed models was assessed using root mean squared error (RMSE), objective function (OF), and etc. Among all algorithms assessed, XGB turned out to be the most accurate having = 0.99 and least OF value of 0.0063 followed by AdaBoost, RFR, and other algorithms. The developed XGB model was also used to conduct different explainable artificial intelligence (XAI) analysis including sensitivity and shapley analysis and the results showed that strength of masonry unit ( ) is the most significant variable in predicting CS. Thus, the ML-based predictive models presented in this study can be utilized practically for determining CS of hollow concrete masonry prisms without requiring expensive and time-consuming laboratory testing.
The use of hybrid fibre-reinforced Self-compacting concrete (HFR-SCC) has escalated recently due to its significant advantages in contrast to normal concrete such as increased ductility, crack resistance, and eliminating the need for compaction etc. The process of determining residual strength properties of HFR-SCC after a fire event requires rigorous experimental work and extensive resources. Thus, this study presents a novel approach to develop equations for reliable prediction of compressive strength (cs) and flexural strength (fs) of HFR-SCC using gene expression programming (GEP) algorithm. The models were developed using data obtained from internationally published literature having eight inputs including water-cement ratio, temperature, fibre content etc. and two output parameters i.e., cs and fs. Also, different statistical error metrices like mean absolute error (MAE), coefficient of determination and objective function (OF) etc. were employed to assess the accuracy of developed equations. The error evaluation and external validation both approved the suitability of developed models to predict residual strengths. Also, sensitivity analysis was performed on the equations which revealed that temperature, water-cement ratio, and superplasticizer are some of the main contributors to predict residual compressive and flexural strength.
21 August 2025 in Innovative Infrastructure Solutions
This study aims to accurately predict the flexural strength (FS) of glass fiber reinforced concrete (GFRC) using advanced machine learning (ML) techniques. A novel algorithm, tree structured parzen estimator based extreme gradient boosting (TPE-XGB), is proposed by integrating Bayesian optimization (TPE) for automated hyperparameter tuning with the predictive strength of XGB. In addition to TPE-XGB, other ML algorithms including bagging regressor (BR), gene expression programming (GEP), and multi expression programming (MEP) are also employed for comparison. A comprehensive dataset consisting of 227 experimental instances of GFRC flexural strength was compiled from 33 internationally published studies. The models were trained and evaluated using statistical error metrics, k fold cross validation, scatter plots, and residual analysis. Results showed that all models performed reliably, with TPE-XGB achieving the highest prediction accuracy (testing R2 value of 0.972). In contrast, GEP and MEP, described as grey box models that produce interpretable mathematical expressions, offered empirical equations for FS prediction which enhanced transparency. To further address the non-transparent nature of black box models like TPE-XGB, explainable machine learning (XML) techniques were applied. These included SHAP (Shapley Additive Explanations), Individual Conditional Expectation (ICE), and Partial Dependence Plots (PDP). The analysis revealed that water to cement ratio, quantities of fine and coarse aggregates, and glass fiber content were the most influential variables affecting the flexural performance of GFRC. Finally, a graphical interface is proposed to demonstrate the practical usability of the developed models. This study contributes both accurate prediction tools and interpretable insights, supporting improved and informed design practices in concrete technology.
20 November 2023 in Archives of Advanced Engineering Science
Self-compacting concrete (SCC) is an innovative building material which can flow and compact itself without the use of external vibrations. It is an effective material to enhance the use of industrial waste products such fly ash and silica fume etc in concrete to reduce the carbon emissions from construction industry. Despite the many advantages of SCC over conventional concrete, there are very few methods which can effectively forecast compressive strength of SCC. It is due to the non-linear behaviour of SCC in relation to its mixture components. Thus, an innovative Machine Learning technique called Gene Expression Programming (GEP) is employed to estimate the strength of SCC. For this purpose, a database consisting of 231 datapoints is constructed using extensive literature search. The algorithm resulted in an empirical equation that relates compressive strength with seven most influential parameters: cement, fly ash, silica fume, coarse and fine aggregate, water, and superplasticizer. The dataset is split into two sets called the training and validation datasets having 70% and 30% of the data respectively. The training and validation data will be used to train and validate the algorithm respectively. The algorithm’s accuracy is checked by calculating the four commonly used error metrices: mean absolute error (MAE), root mean square error (RMSE), coefficient of correlation (R) and performance index (ƿ) for both datasets. The statistical evaluation revealed that the errors are within the ranges specified in the literature. The accuracy of the algorithm is also verified by plotting scatter and series plots of training and validation datasets. Thus, the developed equation by GEP algorithm can be effectively used to forecast the 28-day compressive strength of SCC having fly ash and silica fume as mineral admixtures. Received: 29 August 2023 | Revised: 10 October 2023 | Accepted: 28 October 2023 Conflicts of Interest The authors declare that they have no conflicts of interest to this work. Data Availability Statement The data that supports the findings of this study is openly available with waleedbininqiad@gmail.com, and would be shared upon request via email.